RectorSeal® 25552 Multi-Purpose Pipe Thread Sealant, 1/2 pt Can, Yellow
RectorSeal® pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi(for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.
-
BrandRectorSeal®
-
UPC021449255516
-
Manufacturer Part Number25552
-
CountryUSA
-
Temperature Rating20 to 140 deg F
-
Flash Point150 deg F
-
ColorYellow
-
TypeMulti-Purpose
-
CompositionDiacetone Alcohol
-
VOC Content23 %
-
Container Size1/2 pt
-
Container TypeCan
-
Specific Gravity1.38
-
Odor/ScentMild
-
Bonds ToGalvanized Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, Reinforced Fiberglass and PVC Pipes
- Lubricates and protects threads
- For use with potable water (hot/cold)
- Soft setting, slow drying and will not dry out in the can
- Immediate pressurization on pipe up to 2 in at 100 psi
- Lead-free and contains no other metals
- Permits easy break out with no damage to threads
- Brushable from 20 to 140 deg F, for pressure up to 12000 psi (liquids) and 2600 psi (gases)
-
UNSPSC31201701
-
Package Description8/CS
-
Standards/ApprovalsANSI LC 7-2009|CAN 61|CSA Certified|NSF/ANSI 61-G/372|NSF DWV ASSE 1051|IAPMO Listed|UL Listed|ULC Fire Listed|UPC File No. 1282
-
Catalog
-
Specification Sheet
-
SDS
Recently Viewed
RectorSeal® pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi(for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.
IKO PILLOBALL PHS12A Metric Series Insert/Lubrication Type Rod End, 12 mm Dia Bore, 30 mm OD, 19 mm W, 13100 N Dynamic/16900 N Static Load
PILLOBALL self-aligning Rod Ends can be used as link mechanisms in a variety of machines and are designed for easy installation.
Browning® 1296946 Tightener Shaft, 1 in Dia x 2-1/8 in L Shaft, 3-3/8 in OAL
Browning® 1296946 Tightener Shaft, 1 in Dia x 2-1/8 in L Shaft, 3-3/8 in OAL
Loctite® 88552 565™ High Viscosity Low Strength Thread Sealant, 250 mL Tube, White
Loctite® 88552 565™ High Viscosity Low Strength Thread Sealant, 250 mL Tube, White
18" DUST MOP FRAME - MAG5118F >
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
