ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 V AC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 VAC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
-
BrandILSCO®
-
UPC783669713046
-
Manufacturer Part Number23210-B2
-
CountryUSA
-
Temperature Rating-55 to 110 deg C
-
ColorBlack
-
TypeHeavy Wall Flame Retardant
-
Voltage Rating600 V AC
-
Inner Diameter Expanded2.05 in
-
Inner Diameter Recovered3/4 in
-
Shrink Ratio3:1
-
Length4-1/2 in
- Inner adhesive liner
- Provides a wide range of coverage when used on connectors and cable
- Melts to form intimate contact with part to seal out elements and produce a watertight seal suitable for above ground, direct burial and underwater applications
- Ensures reliability
-
Alternative Part Number7778056
-
UNSPSC39121723
-
IDEA Index ID7778056
-
Package DescriptionBAG
-
Standards/ApprovalsMil Spec No. I-81765-1A|CSA File No. AP-100973-1 for direct burial application|UL 8M24/486D/File No. E158587|PROP65:cancer and reproductive harm - www.P65Warnings.ca.gov
-
Specification Sheet
Recently Viewed
ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 V AC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® 23210-B2 Heavy Wall Flame Retardant Shrink-On Tubing Cap, 600 VAC, 2.05 in ID Expanded, 3/4 in ID Recovered, 3:1 Shrink Ratio
Gates® Power Transmission PowerGrip® GT®3 1512-8MGT-50 Synchronous Belt, 50 mm W, 1512 mm OAL, 8 mm Pitch, 189 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 1600-5MGT-15 Synchronous Belt, 15 mm W, 1600 mm OAL, 5 mm Pitch, 320 Teeth, Neoprene
The PowerGrip® GT®3 belt has twice the load carrying capacity of its predecessor HTD®. In addition, less width is required compared to HTD®, allowing lighter, more compact drives.
Gates® Power Transmission PowerGrip® GT®3 1778-14MGT-55 Synchronous Belt, 55 mm W, 1778 mm OAL, 14 mm Pitch, 127 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 1610-14MGT-40 Synchronous Belt, 40 mm W, 1610 mm OAL, 14 mm Pitch, 115 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
Gates® Power Transmission PowerGrip® GT®3 1800-8MGT-20 Synchronous Belt, 20 mm W, 1800 mm OAL, 8 mm Pitch, 225 Teeth, Neoprene
Reduce both acquisition costs and transaction costs by designing with PowerGrip® GT®3. The PowerGrip® GT®3 belt has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD® belts. PowerGrip® GT®3 drive systems offer the largest selection of belts and sprockets in the industry. At reduced widths, PowerGrip® GT®3 belts can be used as a direct replacement for most 8 mm and 14 mm pitch standard rubber RPP® and HTD® synchronous belts.
