ILSCO® ClearChoice® 23081-B2 Type HSEC Heavy Wall Heat Shrink End Cap With Adhesive Liner, 600 V AC, 3/4 in ID Expanded, 0.22 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® 23081-B2 Type HSEC Heavy Wall Heat Shrink End Cap With Adhesive Liner, 600 VAC, 3/4 in ID Expanded, 0.22 in ID Recovered, 3:1 Shrink Ratio
-
BrandILSCO®
-
UPC783669713022
-
Manufacturer Part Number23081-B2
-
CountryUSA
-
Temperature Rating-55 to 110 deg C
-
ColorBlack
-
TypeType HSEC Heavy Wall
-
Voltage Rating600 V AC
-
Inner Diameter Expanded3/4 in
-
Inner Diameter Recovered0.22 in
-
Shrink Ratio3:1
-
Length3-1/2 in
- Tin plated finish
- Flame retardant meets Mil Spec 23053/15 rigid requirements for flame retardancy
- 3:1 shrink ratio provides a wide range of coverage when used on connectors and cable
- Ensures reliability for insulating terminations and splices
- Inner adhesive liner melts to form intimate contact with part to seal out elements and produce a watertight seal suitable for above ground, direct burial and underwater applications
- 8 to 4/0 AWG cable
- 0.08 in recovered wall thickness
-
Alternative Part Number7778040
-
UNSPSC39121723
-
IDEA Index ID7778040
-
Package DescriptionBAG
-
Standards/ApprovalsCSA AP-100973-1|MIL I-81765-1A/23053/15|UL 486D/E158587|PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
-
Specification Sheet
Recently Viewed
ILSCO® ClearChoice® 23081-B2 Type HSEC Heavy Wall Heat Shrink End Cap With Adhesive Liner, 600 V AC, 3/4 in ID Expanded, 0.22 in ID Recovered, 3:1 Shrink Ratio
ILSCO® ClearChoice® 23081-B2 Type HSEC Heavy Wall Heat Shrink End Cap With Adhesive Liner, 600 VAC, 3/4 in ID Expanded, 0.22 in ID Recovered, 3:1 Shrink Ratio
Browning® 767612 VTBS 200 Normal Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 3 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 4 in OAL x 3-3/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® Gripbelt® 1060565 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 6-1/2 in OD, 6.45 in Dia Pitch, 11/16 in W Face
3/4" -MALE PIPE THREADX5" BLACK NIPPLE-FIT3/4X5BN >
1/2" -MALE PIPE THREADX5-1/2" GALVANIZED NIPPLE-FIT1/2X51/2GN >
1/2" X 4-1/2" BLACK NIPPLE-JPW1/2X41/2BN >


