Electric Tankless Water Heaters
STIEBEL ELTRON 220816 Mini™ Single Handwashing Sink Electric Tankless Water Heater, 120 V AC, 3000 W, 1 ph, 3/8 in Water, 25 A, Commercial/Residential/Dual: Commercial
The tankless electric water heater shall be equipped with a bare wire nickel chrome type heating element housed in fiberglass reinforced high temperature plastic containment. The housing of the unit shall be made of high impact polycarbonate plastic. The flow switch that operates the heating element shall be of the mechanical pressure differential type. The unit shall be equipped with a safety high-limit switch with manual reset. The water connections shall be designed for standard 3/8 in O.D. flexible braided stainless steel hose type connectors. The unit shall be mounted with water connections facing either top or bottom only. The units shall ship with a AWG #12 wire harness with a length of 2 ft. The unit shall conform to ANSI /UL. 499 and be certified to CAN/CSA E335-1 and E335-2-35.
Recently Viewed
Precision Brand® 13975 Metric Grease Fitting Kit, 95 Pieces, For Use With Toolroom or Toolbox, Steel
Metric size, push type, plated fittings permit lubricant to flow. Built-in ball, under spring pressure, prevents dirt from entering. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 95-piece metric grease fitting Assortment contains: (20) 6 x 1 mm x straight, (10) 6 x 1 mm x 45 degrees, (10) 6 x 1 mm x 90 degrees, (20) 8 x 1 mm x straight, (10) 8 x 1 mm x 45 degrees, (10) 8 x 1 mm x 90 degrees, (5) 10 x 1 mm x straight, (5) 10 x 1 mm x 45 deg and (5) 10 x 1 mm x 90 deg.
Precision Brand® 12945 Grease Fitting Kit, 90 Pieces, For Use With Toolroom or Toolbox, Steel
Push type, plated fittings permit lubricant to flow. Built-in ball, under spring pressure, prevents dirt from entering. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 90-piece grease fitting Assortment contains: (30) 1/8 in NPT - straight, (5) 1/8 in NPT - 45 deg, (5) 1/8 in NPT - 90 deg, (30) 1/4-28 straight, (10) 1/4-28 45 deg and (10) 1/4-28 90 deg.
GEARWRENCH® 3885 Tap and Die Set, 40 Pieces, #4-40 to 1/2-20 Tap Thread, #4-40 to 1/2-20 Die Thread, NPT/UNC/UNF Thread, Hexagon Die
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
GEAR RACKS-BRW6NSR10X5/8 >
