Results 1 - 1 of 1
Grid

The tankless electric water heater shall be equipped with a bare wire nickel chrome type heating element housed in fiberglass reinforced high temperature plastic containment. The housing of the unit shall be made of high impact polycarbonate plastic. The flow switch that operates the heating element shall be of the mechanical pressure differential type. The unit shall be equipped with a safety high-limit switch with manual reset. The water connections shall be designed for standard 3/8 in O.D. flexible braided stainless steel hose type connectors. The unit shall be mounted with water connections facing either top or bottom only. The units shall ship with a AWG #12 wire harness with a length of 2 ft. The unit shall conform to ANSI /UL. 499 and be certified to CAN/CSA E335-1 and E335-2-35.

Recently Viewed

This IRWIN HANSON 536/526 Series 5-Piece Straight-Flute Screw Extractor Set is designed for softer materials or thin-walled pieces, such as pipes and fittings. The design on these screw extractors eases extraction because it does not expand the material as it is removed. Each IRWIN screw extractor can remove both left-hand and right-hand threaded parts and has the size and recommended drill bit size etched onto it.

My Wishlist
Compare

Enerpac® ZCP-1M 1 Button Pendant Assembly, 10 feet Electric Pump

Hydraulic Pump Accessories & Parts
$569.60

Enerpac® ZCP-1M 1 Button Pendant Assembly, 10 feet Electric Pump

My Wishlist
Compare

2-1/4"-ID X 2-1/2"-OD O-RINGS CUS 228

Standby Generators
$0.49

2-1/4" -IDX2-1/2" -OD O-RINGS

1/4" ALUMINUM CABLE STOPS-SWC14STOP >

ELECTRIC FIBERGLASS CEILING BOX-JWH519255 >

My Wishlist
Compare

912-10-120 10-mm X 1.50x120-mm Socket

SOCKET HEAD CAP SCREWS
$3.06

10-MM X 1.50X120-MM SOCKET HEAD CAPSCREW-MET91210120 >

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu