Selkirk® by Duravent LockTab® 106036 RV Series Type B Double Wall Round Gas Vent Pipe, Steel, 6 in Dia x 3 ft L, Galvanized, Domestic
Our non-positional lock system on the Selkirk® by Duravent RV Gas Vent is the best lock system on the market today. The incorporation of the LockTab® feature simply improves our lock system by adding flexibility and meeting market needs.
-
BrandSelkirk® by Duravent
-
UPC053713126468
-
Manufacturer Part Number106036
-
CountryUSA
-
FinishGalvanized
-
MaterialSteel
-
TypeType B Double Wall Round
-
SeriesRV Series
-
Diameter6 in
-
Domestic/ImportDomestic
-
Length3 ft
- The locktab is located on the female end of the gas vent
- Assemble the gas vent sections
- The locktab is then depressed with a thumb or blunt object such as a screwdriver into the lock channel of the male end
- To disengage the locktab, pry it up by using a screwdriver or knife blade
- The RV line of Selkirk round vent pipe and fittings is designed for use on approved gas appliances in residential and light commercial and industrial applications
- Round vents for large appliances will be found in the QC section which follows
- The Outside Diameter of RV is approximately 1/2 in larger
- Outer material is 28 ga galvanized steel and inner liner is aluminum
- Easy to assemble and can be combined to obtain the required installation height
- Sectional overlap of 1.5 in and hence net assembled length is 1.5 in less than listed lengths
- Inner liner of aluminum alloy 1100, 3003, 3104, 3105 or 5010
- Outer wall of UL recognized G90 galvanized steel
-
Alternative Part Number6RV-36
-
UNSPSC40101506
-
Package Description6/CS
-
Standards/ApprovalsNFPA 211/54|UL 441|ULC S605
-
WarrantyLifetime
-
Catalog
Recently Viewed
Selkirk® by Duravent LockTab® 106036 RV Series Type B Double Wall Round Gas Vent Pipe, Steel, 6 in Dia x 3 ft L, Galvanized, Domestic
Our non-positional lock system on the Selkirk® by Duravent RV Gas Vent is the best lock system on the market today. The incorporation of the LockTab® feature simply improves our lock system by adding flexibility and meeting market needs.
GEARWRENCH® 3886 Tap and Die Set, 40 Pieces, M3x0.5 to M12x1.75 Tap Thread, M3x0.5 to M12x1.75 Die Thread, BSP/UNC/UNF Thread, Hexagon Die
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
1/2" X 5" Square Head Set Screw
GFCI COMBINATION SWITCH, WALL PLATE. WHITE-JWH506389 >
10-32" X 1/2" Stainless Steel Socket Head Set Screws
3/4" SCH-40 PVC PLASTIC PIPE--LG/20'-PVC401552 >
