WATTS® 0009280 LF25AUB-Z3 Pressure Reducing Valve, 3/4 in Nominal, FNPT Union x FNPT End Style, 10 to 35 psi Pressure, Cast Copper Silicon Alloy Body
This 3/4 inch lead free brass water pressure reducing valve for low pressure ranges is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). The low pressure range is 10 to 35 psi (69 to 241 kPa) with the standard setting at 30 psi (207 kPa).
-
BrandWATTS®
-
UPC098268330069
-
Manufacturer Part Number0009280
-
CountryUSA|Canada
-
Temperature Rating33 to 160 deg F
-
Pressure Range10 to 35 psi
-
Top to Inlet Center7 in
-
MediaWater
-
Nominal Size3/4 in
-
SeriesLF25AUB-Z3
-
Inlet to Outlet Length5-5/16 in
-
Softgoods MaterialReinforced EPDM Diaphragm/Polymer Seat
-
Body MaterialCast Copper Silicon Alloy
-
End StyleFNPT Union x FNPT
- Replaceable seat module
- Serviceable in line
- Bypass feature controls thermal expansion pressure
- Low pressure applications
- Integral stainless steel strainer removable for cleaning
- Sealed spring cage with stainless steel cage screws
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | WLF25AUBLPZ3F |
-
Alternative Part NumberLF25AUB-LP-Z3 3/4
-
UNSPSC40141652
-
Package DescriptionEACH
-
Standards/ApprovalsANSI A112.26.2|ASSE Standard 1003|CSA Standard B356|IAPMO Listed|MIL-V-18146B Type I|NSF Approved|Southern Standard Plumbing Code|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Warranty1 year Limited
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
WATTS® 0009280 LF25AUB-Z3 Pressure Reducing Valve, 3/4 in Nominal, FNPT Union x FNPT End Style, 10 to 35 psi Pressure, Cast Copper Silicon Alloy Body
This 3/4 inch lead free brass water pressure reducing valve for low pressure ranges is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). The low pressure range is 10 to 35 psi (69 to 241 kPa) with the standard setting at 30 psi (207 kPa).
DeWALT® Spike® 05574-PWR 1-Piece Pin Anchor, 1/2 in Dia, 5 in OAL, Mushroom Head, Carbon Steel
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
MOLDED ON PLUG PROVIDES EXCELLENT STRAIN RELIEF. SAFE HANDLING AND DURABILITY
-JWH512680 >
BBI 087150 Partially Threaded Cap Screw, 3/8-16, 2-1/2 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087150 Partially Threaded Cap Screw, 3/8-16, 2-1/2 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 221058 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/8 in Dia x 3/4 in L Shoulder, 5/16-18
BBI 221058 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/8 in Dia x 3/4 in L Shoulder, 5/16-18
Precision Brand® 22L25 Shim Stock, 302 Full Hard Stainless Steel, 50 in Roll L x 6 in W x 0.025 in THK
Stainless steel shim is made from a full hard, cold rolled, 302 stainless steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Widely used in applications where corrosion resistance is required. Used in conventional power plants, nuclear plants, oil and gas refineries and desalinization projects. Precision Brand® shim stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
