Inside Micrometers
Starrett® 124CZ Solid Rod Inside Micrometer, 8 to 32 in, Graduations: 0.001 in, Steel
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3" and the 50-75mm rods). Rod diameters are approximately 1/4" (6mm) on the A and B sizes, and approximately 11/32" (8.5mm) on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 8-32" Range, .001" Grad, 4 Measuring Rods with Case.
Starrett® 124BZ Solid Rod Inside Micrometer Set, 2 to 12 in, Graduations: 0.001 in, Steel
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 50-75mm (2-3") rods). Rod diameters are approximately 6mm (1/4") on the A and B sizes, and approximately 8.5mm (11/32") on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 2-12" Range, .001" Grad, 10 Measuring Rods with Case.
Mitutoyo 133-228 Imperial Single Rod Tubular Inside Micrometer With Locking Clamp, 7 to 8 in, Graduations: 0.001 in, Carbide Tip, Satin Chrome
Recently Viewed
9-PC 1/4"-DR MET SOCKET SET - ALL19018 >
Ever have to hunt around or figure out which drill bit to use with a certain tap? Tired of using a T-handle to tap the hole? No more, because now you've got the Greenlee combination drill tap bit, which drills the proper hole size and taps the hole all-in one operation and at an affordable price - saving you time and money.
10-PC 1/4"-DR MET SOCKET SET - ALL19017 >
Ever have to hunt around or figure out which drill bit to use with a certain tap? Tired of using a T-handle to tap the hole? No more, because now you've got the Greenlee combination drill tap bit, which drills the proper hole size and taps the hole all-in one operation and at an affordable price - saving you time and money.
GEARWRENCH® 890040 Pass-Thru® Socket Driver Bit Set, 1/4 in, 3/8 in Drive, T8 to T50 Torx, 39 Pieces, Full Polished Chrome
The Pass-Thru™ socket and GearRatchet™ ratchet system by GEARWRENCH was designed to improve productivity and access on every job. The GearRatchet™ ratchets need as little as 5° to move fasteners vs. 30° for standard wrenches and are 40% stronger than standard ratchets by eliminating the drive tang. The ratchets are up to 50% thinner than standard ratchets providing superior access to even the most hard-to-reach fasteners.
Greenlee® Slug-Buster® 00042P Replacement Draw Stud, Manual Driver, 3/8 in Dia x 1-5/8 in L, For Use With Slug-Buster® Knockout Punch
Greenlee® Slug-Buster® 00042P Replacement Draw Stud, Manual Driver, 3/8 in Dia x 1-5/8 in L, For Use With Slug-Buster® Knockout Punch
