Inside Micrometers
Mitutoyo 133-228 Imperial Single Rod Tubular Inside Micrometer With Locking Clamp, 7 to 8 in, Graduations: 0.001 in, Carbide Tip, Satin Chrome
Starrett® 124BZ Solid Rod Inside Micrometer Set, 2 to 12 in, Graduations: 0.001 in, Steel
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 50-75mm (2-3") rods). Rod diameters are approximately 6mm (1/4") on the A and B sizes, and approximately 8.5mm (11/32") on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 2-12" Range, .001" Grad, 10 Measuring Rods with Case.
Starrett® 124CZ Solid Rod Inside Micrometer, 8 to 32 in, Graduations: 0.001 in, Steel
The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3" and the 50-75mm rods). Rod diameters are approximately 1/4" (6mm) on the A and B sizes, and approximately 11/32" (8.5mm) on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 8-32" Range, .001" Grad, 4 Measuring Rods with Case.
Recently Viewed
5-PC 12-PT BOX END WRENCH SET - ALL29300 >
12-PC 6-PT 3/8"-DR SOCKET SET - ALL19502 >
EATON 10250TA4 Heavy Duty Extended Boot, For Use With Pushbutton Operator, 30.5 mm, Red
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
GEARWRENCH® 80742 Standard Long Length Socket Driver Bit Set, 1/4 in, 3/8 in, 1/2 in Hex, 1/4 in, 3/8 in, 1/2 in Drive, T8 to T60 Torx, 84 Pieces, Polished Chrome, ASME B107.1
The GEARWRENCH 84 piece master hex and Torx® bit socket set includes the most popular sized hex, ball end hex, Torx® bit sockets, External Torx® sockets, and Tamper-proof Torx® bit sockets. The set is contained in a blow mold case for storage and organization. Our sockets are manufactured from alloy steel and are heat treated for maximum durability. The bits are manufactured from S2 steel. The tools in this set are intoned to be used with manual tools only.
