MSA V-Gard® 10057446 Front Brim Hard Hat, 6-1/2 Fits Mini Hat, 8 Fits Max Hat, Polyethylene, 1-Touch® Adjustment Suspension, ANSI Electrical Class Rating: Class E, ANSI Impact Rating: Type I
The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
-
BrandMSA
-
UPC641817014387
-
Manufacturer Part Number10057446
-
CountryUSA|Canada
-
Fits Maximum Hat Size8
-
Fits Minimum Hat Size6-1/2
-
MaterialPolyethylene
-
ColorRed
-
TypeFront Brim
-
ANSI Electrical Class RatingClass E
-
ANSI Impact RatingType I
-
SizeStandard
-
SlottedYes
-
Suspension Type1-Touch® Adjustment
- Self-adjusting crown straps ensure a comfortable fit
- Available in a variety of colors and sizes
- Superior top impact protection
- Designed for use with MSA accessories to ensure compliance with the helmet and accessory
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 1091356 |
-
UNSPSC46181701
-
Package DescriptionEACH
-
Standards/ApprovalsANSI/ISEA Z89.1-2014|AS/NZS1801-1997|CSA Z94.1-2005|DSTU EN 397-2001|EN397: 2012|EN50365:2002|EN13463-1:2001|GB2811-2007|GOST R 12.4.207-99|GOST 12.4.128-83|IRAM 3620|MS183:2001|NBR 8221|NCH 461|NMX-S-055-SCFI-2009|NOM-115-STPS-2009|NRF-058-PEMEX-2004|NRF-012-CFE-2010|OSHS to Rule 1080|SANS 1397:2003 & DMR|SS98:2005|TIIS to Safety Helmets|cSEI to HD1MSA45_LT|SEI to HDMSA01_LT
-
SDS
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
-
Technical Bulletin
Recently Viewed
The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.
150" X 1" .035 5/7-T BANDSAW BLADE-MOR9155571500>
Howard Leight by Honeywell QB3HYG Quiet Band Earplugs, 23 dB Noise Reduction, Pod Shape, ANSI S3.19-1974, EN 352-2:1993 / EN-24869-1:1993, Reusable, Banded Design
3/4" X 3/4" X 1" COPPER TEE-NIB611R3/4X3/4X1 >
CROWFOOT 230-VOLT 50-AMP MALE PLUG-FOR32530 >
Milwaukee® 48-73-1420 Full Face Shield, For Use With Milwaukee Safety Helmets and Hard Hats, Clear Visor, Polycarbonate Visor, 9.5 in H x 10 in W
The MILWAUKEE® BOLT™ Full Face Shield is designed to give you long-lasting visibility. The ANSI Z87.1+ rated Milwaukee face shield is treated with a fog-free interior coating and an anti-scratch exterior hard coating for longer product lifetimes. Attaching and removing the shields is made simple and toolless with secure snap-in snap-out covers. This face shield is part of the BOLT™ accessory system which allows users to Secure Accessories Simultaneously. The face shield secures into the BOLT™ Front Slots of all MILWAUKEE® safety helmets and hard hats. The face shield includes a low-profile BOLT™ Headlamp Bracket that allows compatibility with select headlamps.
