Pyramex BLACK/BLOCKER-LENS SAFETY GLASSES PSP SB-1835-S
Pyramex® SB1835S Safety Eyewear, Anti-Scratch, Sun Block Bronze Lens, Black, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
BrandPyramex®
-
UPC814992003341
-
Manufacturer Part NumberSB1835S
-
CountryUSA
-
Temple StyleAdjustable Ratchet
-
Frame ColorBlack
-
Frame MaterialNylon 6.6
-
UV ProtectionYes %
-
SizeUniversal
-
Specifications MetANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
Lens CoatingAnti-Scratch
-
Lens ColorSun Block Bronze
-
Lens MaterialPolycarbonate
-
Bridge Size10.5 mm
- Temples adjust to four different lengths
- Nose buds secure the glass and prevent slipping
- 9.75 base curved lens provides full side protection without distracting seams or traditional type side shields
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- 99
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 347HY8 |
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1|CE EN 166 Certified|CAN/CSA Z94.3-07
-
Specification Sheet
Recently Viewed
Pyramex® SB1835S Safety Eyewear, Anti-Scratch, Sun Block Bronze Lens, Black, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
SENCO® 4Z0101N FramePro®325XP Paper Taped Pneumatic Smooth Shank Framing Nailer, 2 to 3-1/4 in Fastener, Angled Strip Collation, 83 Magazine, 70 to 120 psi
This well-balanced light weight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw and smooth-shank 30 to 34 deg paper taped strip nails. SENCO® XP tools are specifically engineered for demanding pros and demanding environments.
1-15/16" -ID SPHERICAL INSERT BEARING-FAFGN115KRRB >
GRINDING WHEELS-CRB27536>
BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.
