Speakman® SE-580 Traditional Eyewash With Aerated Spray Heads, Wall Mount, Flag Push Handle Operation, ANSI Z358.1-2004
Speakman® traditional series round bowl eyewash stations provide the highest level of performance. All traditional series eyewash stations feature dual aerated spray heads with automatic flow controls and flip-top dust covers. The aerated water flow, a Speakman® signature feature allows soft flowing water to provide a wider coverage, cleaning full facial areas. Additionally our emergency eyewash stations are equipped with a stay open ball valve activated by a paddle handle allowing hands-free operation once the eyewash has been activated. The Speakman® traditional series SE-580 wall mounted eyewash with plastic bowl meets the ANSI/ISEA Z385.1 standard & osha compliance.
-
BrandSpeakman®
-
UPC671252000508
-
Manufacturer Part NumberSE-580
-
CountryUSA|Canada
-
Pipe MaterialPolished Chrome Brass
-
Fitting MaterialPolished Chrome Brass
-
Fitting Size1/2 in FNPT
-
ColorYellow
-
Valve MaterialPolished Chrome Brass
-
Mounting TypeWall
-
Head Diameter1-1/2 in
-
Height13 in
-
Width15 in
-
SeriesTraditional
-
Number of Heads2
-
Depth14-1/2 in
-
Specifications MetANSI Z358.1-2004
-
Operation TypeFlag Push Handle
-
Eye Wash Handle MaterialStainless Steel
- ABS plastic bowl
- Dual aerated spray heads with flip top caps
- Integral flow controls
- Features a push handle activation
- 3.18 gpm at 30 psi
-
UNSPSC46181810
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Z358.1-2004|PROP65: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Specification Sheet
-
Instruction/Installation Manual
-
Owners/User Manual
Recently Viewed
Speakman® SE-580 Traditional Eyewash With Aerated Spray Heads, Wall Mount, Flag Push Handle Operation, ANSI Z358.1-2004
Speakman® traditional series round bowl eyewash stations provide the highest level of performance. All traditional series eyewash stations feature dual aerated spray heads with automatic flow controls and flip-top dust covers. The aerated water flow, a Speakman® signature feature allows soft flowing water to provide a wider coverage, cleaning full facial areas. Additionally our emergency eyewash stations are equipped with a stay open ball valve activated by a paddle handle allowing hands-free operation once the eyewash has been activated. The Speakman® traditional series SE-580 wall mounted eyewash with plastic bowl meets the ANSI/ISEA Z385.1 standard & osha compliance.
2"-MPT X 8" METAL BLACK NIPPLES-JPW2X8BN>
Morse MHS04P (177795), 8 piece, plumbers hole saw kit contains bimetal hole saw diameters that allow pipe pass through, and tapping, of common diameters of black iron, copper and PVC/ABS. Kit includes 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", and 2-1/4" diameter, bimetal hole saws, one (1) MA34, 3/8" shank (1/2"-20) standard arbor, one (1) MA45PS, 1/2" shank (5/8-18) pin drive arbor, and carrying case.
2-1/2" -MALE PIPE THREADXCLOSE BLACK NIPPLE-FIT21/2XCLBN >
Gates® Power Transmission Super HC® Molded Notch PowerBand® 4/5VX1700 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 170 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Gates® Power Transmission Super HC® Molded Notch PowerBand® 4/3VX950 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 95 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.





