3-TA-82 3 Groove A-belt
3TA82 ; SPLIT TAPER A SHEAVE
Transmission Pulley; 3 Grooves; 8.45" Outside Diameter; Bushed; Q1 Bushing Series; A Belt Series; 8.2" Pitch Minimum; 8.2" Pitch Maximum; 3/4 To 2-11/16" Bushing Bore Range; Keyway
Recently Viewed
3TA82 ; SPLIT TAPER A SHEAVE
Transmission Pulley; 3 Grooves; 8.45" Outside Diameter; Bushed; Q1 Bushing Series; A Belt Series; 8.2" Pitch Minimum; 8.2" Pitch Maximum; 3/4 To 2-11/16" Bushing Bore Range; Keyway
5-PIECE PAINT BRUSH SET-RGLPBS5 >
Drillco 200A101 Jobber Length Drill Bit, 1/64 in Drill - Fraction, 0.0156 in Drill - Decimal Inch, 118 deg Point, HSS, Oxide Treated
200/240/280 series drills are designed for general purpose drilling under a wide range of conditions. For low to medium tensile strength materials. The surface treatment prevents chip welding, improves chip flow and increases abrasion resistance.
Browning® 1077429 QD Bushing, 2-3/8 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 1.995 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Dichtomatik N70433 O-Ring, 433 Dash Number, 5.475 in ID x 6.025 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1/2"-ID 1008-STYLE TAPER-LOCK BUSHING-BRW1008X1/2 >
