JASON BX72 COGGED CLASSICAL V-BELTS. 21/32 " TOP WIDTH, 13/32 " THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 75" BELT OUTSIDE LENGTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
JASBX72 >
Recently Viewed
JASON BX72 COGGED CLASSICAL V-BELTS. 21/32 " TOP WIDTH, 13/32 " THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 75" BELT OUTSIDE LENGTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
JASBX72 >
JASON BX83 COGGED CLASSICAL V-BELTS. 21/32 " TOP WIDTH, 13/32 " THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 86" BELT OUTSIDE LENGTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JASBX83 >
Morse® 194619 A Plate Ground Sprocket, 24 Teeth, For Use With Model 350 Torque Limiter Model, 130.05 mm OD
Morse® 194619 A Plate Ground Sprocket, 24 Teeth, For Use With Model 350 Torque Limiter Model, 130.05 mm OD
ASP-162-2-S Industry Standard Clamping Collar, 2-Piece Construction, 1-5/8 in ID x 2-5/8 in OD x 11/16 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Leviton® 80503-I Midway Size Traditional Wall Plate, 1 Gangs, 3-1/8 in W x 4-7/8 in H, Thermoset, Ivory
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
