Leviton® 80503-I Midway Size Traditional Wall Plate, 1 Gangs, 3-1/8 in W x 4-7/8 in H, Thermoset, Ivory
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
-
BrandLeviton®
-
UPC078477153871
-
Manufacturer Part Number80503-I
-
CountryUSA
-
FinishSmooth
-
Thickness0.255 in
-
MaterialThermoset
-
ColorIvory
-
TypeMidway Size Traditional
-
MountingSurface
-
Cutout0.942 in H x 0.406 in W Duplex Receptacle
-
Number of Gangs1
-
Size3-1/8 in W x 4-7/8 in H
- Traditional, easy to clean, smooth finish, non-combustible
- Resistant to fading, discoloration, grease, oil, organic solvents and moisture scratches
- Midway plates can be used to hide wall surface irregularities
- Full 3/8 in taller and wider than standard wallplates
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 5C277 |
| 530009 |
-
Alternative Part Number7354270
-
UNSPSC39121704
-
IDEA Index ID7354270
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed|CSA Certified|ANSI Specified|NEMA Standard
-
Warranty2 Years Limited
-
Catalog
-
Specification Sheet
Recently Viewed
Leviton® 80503-I Midway Size Traditional Wall Plate, 1 Gangs, 3-1/8 in W x 4-7/8 in H, Thermoset, Ivory
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Gates® Power Transmission PowerGrip® 800H100 Heavy Timing Belt, 1 in W, 80 in OAL, 1/2 in Pitch, 160 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Browning® 1296458 T45L Automatic Torque Limiter, 1-3/16 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
1-1/4" EMT ELECTRICAL CONDUIT (FT)-ATB11/4EMT>
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
