Black&Decker 4-1/2" GRINDERS BD- DW-E-43114
The DWE43114 4-1/2 in (115 mm)/5 in (125 mm) high performance cut-off/grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor Dust Ejection System™ technology clears dust and debris for extra protection power tool shuts off before overheating with Power-Off® advanced overload protection.
-
BrandDeWALT®
-
UPC885911471510
-
Manufacturer Part NumberDWE43114
-
CountryUSA|Canada
-
Tool/KitKit
-
TypeHigh Performance
-
Handle TypeBarrel Grip
-
Voltage Rating120 V AC
-
Control TypePaddle Switch
-
Cord Type6 ft
-
Wheel Diameter4-1/2 to 5 in
-
Amperage Rating13 A
-
Arbor/Shank Size5/8-11
-
Horsepower2.3 hp
-
Housing MaterialPlastic
-
Dimensions13 in L
-
Speed11000 rpm
-
Dust ManagementYes
-
Switch TypePaddle
- E-Clutch® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter through the air intake vents
- Dust Ejection System™, E-Clutch® overload protection, tool-free flange system
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | PD20DWE43114 |
| Berkshire eSupply | PD20DWE43114 |
| Berkshire eSupply | PD20DWE43114 |
| Berkshire eSupply | PD20DWE43114 |
-
UNSPSC27112704
-
Package DescriptionEACH
-
Warranty3 years Limited
-
Owners/User Manual
Recently Viewed
The DWE43114 4-1/2 in (115 mm)/5 in (125 mm) high performance cut-off/grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor Dust Ejection System™ technology clears dust and debris for extra protection power tool shuts off before overheating with Power-Off® advanced overload protection.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
#8 X 1-1/2" Pan Head Combo Sheet Metal Screws
LIGHT BULB KEY SOCKET-JWH513643 >
The CP3019 Series - angle pneumatic Die Grinders, with a 1/4' (6.35 mm) collet capacity or CNOMO collet capacity consists of 4 models with 2 free speed options from 12,000 to 20,000 rpm. The powerful motor offers 0.5 hp (375 W) for optimum productivity in heavy applications such as deburring, die contouring, and light chamfering. The range is characterized by a compact design and a simplified safety lever.
1-GAL RENEW FOAMING CARPET SHAMPOO-ML-CC9101GAL >
