Milwaukee® M18 FUEL™ 2766-20 Gen II High Torque Bare Tool Cordless Impact Wrench, 1/2 in 4-Mode Straight Drive, 2400 bpm, 750/1100 ft-lb Torque, 18 V DC, 9-3/4 in OAL
The 2766 M18 FUEL™ high torque 1/2 in. impact wrench with pin detent provides a full corded replacement delivering 750ft-lbs of fastening torque and 1100ft-lbs of nut-busting torque. The industry's most compact cordless high torque impact wrench at 8.1 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool includes a 1/2 in. pin detent anvil which provides superior socket retention. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
-
BrandMilwaukee®
-
UPC045242502219
-
Manufacturer Part Number2766-20
-
CountryUSA|Canada
-
Torque Rating750/1100 ft-lb
-
TypeGen II High Torque
-
Handle TypePistol Grip
-
Voltage Rating18 V DC
-
Housing MaterialGlass Filled Nylon/Rubber/Steel
-
Bare Tool/KitBare Tool
-
Battery TypeLithium-Ion
-
Dimensions3.15 in W x 8.125 in D x 10.75 in H
-
Speed0 to 950/1500/1800/1800 to 750 rpm
-
Blows per Minute2400 bpm
-
Drive Size1/2 in
-
Drive TypeSquare
-
Overall Length9-3/4 in
- POWERSTATE™ brushless motor delivers up to 750 ft-lb of fastening torque and 1100 ft-lb of nut-busting torque
- Most compact cordless high torque impact wrench in its class at 8.1 in L
- Industry leading 4-mode drive control with bolt removal mode, allowing for ultimate control 0 to 950/1,500/1,800/1,800 to 750 rpm and 0 to 1,150/2,100/2,400/2,400 ipm
- Bolt removal mode provides maximum nut-busting torque to break fastener-free, then slows to 750 rpm for more control when removing fasteners
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 408L67 |
| Grainger | 408L67 |
| Grainger | 408L67 |
-
Alternative Part Number14193077
-
UNSPSC27112713
-
IDEA Index ID14193077
-
Package Description1/PK
-
Standards/ApprovalsCSA Certified|ETL Listed|UL Listed
-
Warranty5 years
-
Specification Sheet
Recently Viewed
Milwaukee® M18 FUEL™ 2766-20 Gen II High Torque Bare Tool Cordless Impact Wrench, 1/2 in 4-Mode Straight Drive, 2400 bpm, 750/1100 ft-lb Torque, 18 V DC, 9-3/4 in OAL
The 2766 M18 FUEL™ high torque 1/2 in. impact wrench with pin detent provides a full corded replacement delivering 750ft-lbs of fastening torque and 1100ft-lbs of nut-busting torque. The industry's most compact cordless high torque impact wrench at 8.1 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool includes a 1/2 in. pin detent anvil which provides superior socket retention. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
1-1/4" X 3" MD/HD OVAL DIE SPRINGS-LANSMHO1250300 >
Gates® Power Transmission Polyflex® 3M300 Light Duty V-Belt, 3M Section, 1/8 in W Top, 11.81 in L Outside, 3/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Dichtomatik N70331 O-Ring, 331 Dash Number, 2.225 in ID x 2.645 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Gates® Power Transmission PowerGrip® Twin Power® TP390L050 Light Timing Belt, 1/2 in W, 39 in OAL, 3/8 in Pitch, 104 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
