Porter-Cable® FR350B Framing Nailer Kit, 2 to 3-1/2 in Fastener, Plastic Collation, 60 Nails Magazine, 70 to 120 psi
Porter-Cable® FR350B Framing Nailer Kit, 2 to 3-1/2 in Fastener, Plastic Collation, 60 Nails Magazine, 70 to 120 psi
-
BrandPorter-Cable®
-
UPC028877597607
-
Manufacturer Part NumberFR350B
-
CountryUSA
-
Fastener Size2 to 3-1/2 in
-
Magazine Capacity60 Nails
-
Magazine LoadingBottom Load
-
Tip TypeNon-Marring
-
Tool/KitKit
-
Trigger TypeSequential Actuation
-
Collation Angle22 deg
-
Collation TypePlastic
-
Handle TypeOvermolded Grip
-
Air Flow Rate9.74 cfm
-
Air Inlet1/4 in NPT
-
Air Pressure70 to 120 psi
-
Shank Size0.113 to 0.148 in
- Power-to drive nails up to 3-1/2 x 0.131 in into engineered lumber
- Tool free adjustable depth of drive for proper setting of nail heads
- Low nail lockout indicates when to reload tool
- Reversible rafter hook for hanging tool on left or right side
- Selectable trigger with trigger lockout for restrictive or contact actuation mode
- Tool free adjustable exhaust and depth of drive
- Nail lockout to prevent dry firing
- Selectable trigger for restrictive or contact mode
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 66CL78 |
-
UNSPSC27131506
-
IncludesAir Fitting with Dust Cover and Operating Manual
-
Package Description1/PK
-
Warranty3 Years Limited
-
Warranty Information
Recently Viewed
Porter-Cable® FR350B Framing Nailer Kit, 2 to 3-1/2 in Fastener, Plastic Collation, 60 Nails Magazine, 70 to 120 psi
Porter-Cable® FR350B Framing Nailer Kit, 2 to 3-1/2 in Fastener, Plastic Collation, 60 Nails Magazine, 70 to 120 psi
Morse® 131094 MHSTK Hole Saw, 9/16 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
Morse® 131094 MHSTK Hole Saw, 9/16 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
HCI Preferred Supplier 80205 Pressure Gauge, 0 to 100 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
HCI Preferred Supplier 80205 Pressure Gauge, 0 to 100 psi Pressure, 1/4 in Connection, 2-1/2 in Dia Dial, +/-1.5 % Accuracy
BRASS PLASTIC HANDLED DETAIL BRUSH-MAG271WB>
Morse® AT40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
Morse® AT40 Hole Saw, 2-1/2 in Dia, 1-1/2 in D Cutting, Tungsten Carbide Cutting Edge
2" SCH-80 CPVC SOCKET FLANGES-NIB1851020 >

