Milwaukee® M18 FUEL™ 2744-20 Brushless Cordless Framing Nailer, 2 to 3-1/2 in Fastener, For Fastener Type: 21 deg Framing Nailer, 43 lb Magazine, 14.1 in OAL, Battery

0 Ratings
$529.47
In Stock
SKU: MWK274420
GTIN (EAN,ISBN): 00045242537280
noimage_new

The MILWAUKEE® M18 FUEL™ 21 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 21 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

In Stock
HCI of Jackson: 0
HCI of Dyersburg: 0
HCI of Humboldt: 0
HCI of Union City: 0
HCI of Gallatin: 0
My Wishlist
Compare
Main specs
  • Brand
    Milwaukee®
  • UPC
    045242537280
  • Manufacturer Part Number
    2744-20
  • Country
    USA|Canada
Specification
  • Fastener Size
    2 to 3-1/2 in
  • Magazine Capacity
    43 lb
  • Power Source
    Battery
  • Tip Type
    Non-Marring
  • For Fastener Type
    21 deg Framing Nailer
  • Collation Angle
    21 deg
  • Collation Type
    Strip
  • Color
    Black/Red
  • Type
    Brushless
  • Voltage Rating
    18 V
  • Housing Material
    Reinforced Nylon
  • Bare Tool/Kit
    Kit
  • Battery Included
    Yes
  • Battery Type
    REDLITHIUM™ Lithium-Ion
  • Dimensions
    4.7 in W x 15.2 in H
  • Overall Length
    14.1 in
Features
  • REDLITHIUM battery technology - superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market
  • REDLINK PLUS intelligence - provides optimized performance and overload protection using total system communication between tool, battery and charger
  • POWERSTATE Brushless Motor delivers longer life and higher performance
  • Tool Free Drive Depth Adjustment
  • On Board Hex Key Storage
  • On/Off Power Button
  • Sequential and Contact Actuation Firing Modes
  • Power to Nail Engineered Lumber
  • Fires 3 Nails Per Second
  • No Gas Cartridge Required - Completely Battery Operated
  • Zero Ramp Up Time
  • Dry Fire Lockout
Competitor Information
Competitor Name Competitor Part Number
Fastenal 2194458
Grainger 60RE86
Additional Information
  • Alternative Part Number
    16712670
  • UNSPSC
    27112716
  • IDEA Index ID
    16712670
  • Includes
    Belt Hook and Rafter Hook
  • Package Description
    EACH
  • Standards/Approvals
    UL Listed
  • Warranty
    3 Year Limited Warranty
Reviews

There are yet no reviews for this product.

Recently Viewed

The MILWAUKEE® M18 FUEL™ 21 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 21 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

The 20V MAX* cordless 30o paper collated framing nailer features the power to drive a range of fasteners between 2 in and 3-1/2 in for jobsite versatility. Our upgraded engine design delivers increased power and drive quality compared to previous DeWALT® cordless nailers. Its compact shape, well balanced design, and easy-to-operate features make it a highly productive tool that helps pros get the job done quickly and efficiently.

The Black Stallion JF1010-LM is our 9 Oz Flame Resistant Safety Welding Jacket with FR Triple Trim Reflective Tape. 30 inches in length, the safety lime Welding Jacket is loaded with safety extras. 2” flame-resistant triple trim tape with 3/4” reflective silver helps keep the wearer visible, even in low light or visibility. The Standup Welder's collar helps protect the neck from sparks and splatter while welding, while the left sleeve scribe pocket holds welding markers & pens. A convenient inside pocket holds small items and devices and 6 powder-coated steel front snaps and wrist snaps help keep the fit snug and adjustable. Overall, the JF1010 is ideal for light welding applications where being "seen" is critical (construction, traffic zones, etc.).

The MILWAUKEE® M18 FUEL™ 30 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 30 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

The Black Stallion JF1010-LM is our 9 Oz Flame Resistant Safety Welding Jacket with FR Triple Trim Reflective Tape. 30 inches in length, the safety lime Welding Jacket is loaded with safety extras. 2” flame-resistant triple trim tape with 3/4” reflective silver helps keep the wearer visible, even in low light or visibility. The Standup Welder's collar helps protect the neck from sparks and splatter while welding, while the left sleeve scribe pocket holds welding markers & pens. A convenient inside pocket holds small items and devices and 6 powder-coated steel front snaps and wrist snaps help keep the fit snug and adjustable. Overall, the JF1010 is ideal for light welding applications where being "seen" is critical (construction, traffic zones, etc.).

The MILWAUKEE® M18 FUEL™ 21 Degree Framing Nailer Kit sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 21 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge. This kit includes one M18™ REDLITHIUM™ XC5.0 battery pack, an M18™ & M12™ Multi-Voltage Charger, a rafter hook, non-marring tip, and a contractor bag.

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu