DeWALT® DCN692B XR™ High Performance Cordless Framing Nailer Kit, 2 to 3-1/2 in Fastener, 55 Nails Magazine, 13-1/4 in OAL, Battery
The 20V MAX* cordless 30o paper collated framing nailer features the power to drive a range of fasteners between 2 in and 3-1/2 in for jobsite versatility. Our upgraded engine design delivers increased power and drive quality compared to previous DeWALT® cordless nailers. Its compact shape, well balanced design, and easy-to-operate features make it a highly productive tool that helps pros get the job done quickly and efficiently.
-
BrandDeWALT®
-
UPC885911349000
-
Manufacturer Part NumberDCN692B
-
CountryUSA|Canada
-
Fastener Size2 to 3-1/2 in
-
Magazine Capacity55 Nails
-
Magazine LoadingRear Load
-
Power SourceBattery
-
Tip TypeNon-Marring
-
Trigger TypeSequential/Bump
-
Collation Angle33 deg
-
Collation TypePaper
-
ColorYellow
-
TypeHigh Performance
-
Handle TypeContoured/Overmold
-
Voltage Rating20 VDC
-
SeriesXR™
-
Housing MaterialPlastic
-
Shank Size0.113 to 0.131 in
-
Bare Tool/KitKit
-
Battery Capacity4 Ah
-
Battery IncludedNo
-
Battery TypeLithium-Ion
-
Dimensions4-45/64 in W x 13 in H
-
Overall Length13-1/4 in
- Dual-speed motor optimized to drive a wide range of fasteners for a variety of applications
- Tool-free selector switch for sequential or bump fire modes
- Tool-free depth adjustment for precise nail placement
- Stall release lever to reset driver blade in the event of a jam
- Adjustable rafter hook
- Dry fire lock out prevents tool from firing when nails are low
- 33 deg magazine holds up to 55 paper collated nails
- Capable of driving 3-1/2 in fasteners into dense lumber
- Brushless motor and engine design allow the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
- Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- 2-speed selector switch optimizes speed for fastener lengths
- Easy access to the nosepiece for the removal of jammed nails
- Trigger lock-off allows trigger to be disabled when tool is not in use
- Top cap is impact-resistant and easy to remove for troubleshooting
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 30PL21 |
| Grainger | 30PL21 |
| Grainger | 30PL21 |
| Grainger | 30PL21 |
-
Alternative Part Number15599766
-
UNSPSC27112711
-
IDEA Index ID15599766
-
IncludesNo-Mar Tip and Manual
Recently Viewed
DeWALT® DCN692B XR™ High Performance Cordless Framing Nailer Kit, 2 to 3-1/2 in Fastener, 55 Nails Magazine, 13-1/4 in OAL, Battery
The 20V MAX* cordless 30o paper collated framing nailer features the power to drive a range of fasteners between 2 in and 3-1/2 in for jobsite versatility. Our upgraded engine design delivers increased power and drive quality compared to previous DeWALT® cordless nailers. Its compact shape, well balanced design, and easy-to-operate features make it a highly productive tool that helps pros get the job done quickly and efficiently.
Black Stallion® JF1010-LM-2XL Jacket, 2XL, Cotton, Lime, Resists: Flame, ASTM F1506
The Black Stallion JF1010-LM is our 9 Oz Flame Resistant Safety Welding Jacket with FR Triple Trim Reflective Tape. 30 inches in length, the safety lime Welding Jacket is loaded with safety extras. 2” flame-resistant triple trim tape with 3/4” reflective silver helps keep the wearer visible, even in low light or visibility. The Standup Welder's collar helps protect the neck from sparks and splatter while welding, while the left sleeve scribe pocket holds welding markers & pens. A convenient inside pocket holds small items and devices and 6 powder-coated steel front snaps and wrist snaps help keep the fit snug and adjustable. Overall, the JF1010 is ideal for light welding applications where being "seen" is critical (construction, traffic zones, etc.).
Milwaukee® M18 FUEL™ 2745-20 Brushless Cordless Framing Nailer, 2 to 3-1/2 in Fastener, For Fastener Type: 30 deg Framing Nailer, 51 lb Magazine, 14.1 in OAL, Battery
The MILWAUKEE® M18 FUEL™ 30 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 30 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.
Black Stallion® JF1010-LM-3XL Jacket, 3XL, Cotton, Lime, Resists: Flame, ASTM F1506
The Black Stallion JF1010-LM is our 9 Oz Flame Resistant Safety Welding Jacket with FR Triple Trim Reflective Tape. 30 inches in length, the safety lime Welding Jacket is loaded with safety extras. 2” flame-resistant triple trim tape with 3/4” reflective silver helps keep the wearer visible, even in low light or visibility. The Standup Welder's collar helps protect the neck from sparks and splatter while welding, while the left sleeve scribe pocket holds welding markers & pens. A convenient inside pocket holds small items and devices and 6 powder-coated steel front snaps and wrist snaps help keep the fit snug and adjustable. Overall, the JF1010 is ideal for light welding applications where being "seen" is critical (construction, traffic zones, etc.).
The MILWAUKEE® M18 FUEL™ 21 Degree Framing Nailer Kit sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 21 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge. This kit includes one M18™ REDLITHIUM™ XC5.0 battery pack, an M18™ & M12™ Multi-Voltage Charger, a rafter hook, non-marring tip, and a contractor bag.
TruGuard™ F9-30C-2XL Unlined Welding Jacket, Men's, 2XL, Cotton, Green, Resists: Flame, ASTM 1506
With more features and superior quality, the Black Stallion FR Cotton Welding Jacket F9-30C provides better protection for light welding applications. Black Stallion FR cotton fabric conforms to ASTM D6413 flame resistance and washable test methods. In order to meet ASTM D6413, a sample of fabric must self-extinguish with less than a 2-second after flame and less than 6" char length. Applies to an initial sample and after 25 commercial wash cycles (50 home washings).
