Milwaukee® 3107-6 Grounded Right Angle Drill Kit, 1/2 in Keyed Chuck, 120 V AC, 500 rpm Speed, 16-3/4 in OAL
1/2 in. trigger speed control reversing. 7.0 amp Milwaukee built motor. Helical cut, heat treated gears with durable, glass reinforced nylon handle. Reversing with all ball and roller bearings. Right angle drill features head and handle swivel 360 deg., can be locked tight in any position. Kit includes tool, open end wrench, 3/16 in. socket wrench, chuck remover bar, side handle and impact resistant carrying case.
-
BrandMilwaukee®
-
UPC045242005239
-
Manufacturer Part Number3107-6
-
CountryUSA|Canada
-
Tool/KitKit
-
Chuck Size1/2 in
-
Chuck TypeKeyed
-
ColorBlack/Gray/Red
-
TypeGrounded
-
Handle TypeD-Handle
-
Voltage Rating120 V AC
-
Control TypeVariable Speed Trigger Switch
-
Amperage Rating7 A
-
Housing MaterialMetal
-
Speed500 rpm
-
Overall Length16-3/4 in
- 1/2 in capacity in steel, handles up to a 4-5/8 in "Selfeed" bit
- Long lasting performance - bits are resharpenable, feed screws and arbor are replaceable
- Head and handle swivel 360 deg
- Powerful 7 A motor
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6Z338 |
| Grainger | 6Z338 |
| Grainger | 6Z338 |
-
Alternative Part Number8564428
-
UNSPSC27112703
-
IDEA Index ID8564428
-
Package DescriptionEACH
-
Standards/ApprovalsETL Listed|UL Listed
-
Warranty5 years
-
Owners/User Manual
-
Full Engineering Drawing
Recently Viewed
Milwaukee® 3107-6 Grounded Right Angle Drill Kit, 1/2 in Keyed Chuck, 120 V AC, 500 rpm Speed, 16-3/4 in OAL
1/2 in. trigger speed control reversing. 7.0 amp Milwaukee built motor. Helical cut, heat treated gears with durable, glass reinforced nylon handle. Reversing with all ball and roller bearings. Right angle drill features head and handle swivel 360 deg., can be locked tight in any position. Kit includes tool, open end wrench, 3/16 in. socket wrench, chuck remover bar, side handle and impact resistant carrying case.
IDC Select® IDC M-2-15/16 Finished Bore QD® Bushing, 2-15/16 in Dia Bore, 6-1/2 in Dia Barrel, 9 in Dia Flange, 6-3/4 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Dichtomatik 75102156 O-Ring, 234 Dash Number, 2.984 in ID x 3.262 in OD, FKM, 75 Shore A Durometer, Import, Custom 234-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® 3208139 Type SD Q-D® Bushing, 25 mm Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Cast Iron
Browning® 3208139 Type SD Q-D® Bushing, 25 mm Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Cast Iron
Dichtomatik S70351 O-Ring, 351 Dash Number, 4.725 in ID x 5.145 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Whether drilling, driving, grinding, cutting, sanding, spraying, or hammering, Sunex® tools air tools supply you with power, flexibility and exceptional value.
