Electric Drills
3/8" H/D VSR ELECTRIC DRILL-MWK02241>
3/8" 100-RPM ELECTRIC DRILL-MWK02291>
1-TON 15'-LIFT ELECTRIC CHAIN HOIST
3/8" SD DRILL-BSH1000VSR>
3/8" SD DRILL-BSH1001VSR>
3/8" HD DRILL-BSH1020VSR>
3/8" ELECTRIC DRILL-BSH1021VSR>
3/8" ELECTRIC DRILL-BSH1022VSR>
1/2" ELECTRIC DRILL-BSH1023VSR>
3/8" RIGHT ANGLE ELECTRIC DRILLS-BSH1132>
1/2-TON 20'-LIFT ELECTRIC CHAIN HOIST-JET121200 >
1/2-TON 15'-LIFT ELECTRIC CHAIN HOIST-JET151065 >
2-TON 3PH 230/460 ELECTRIC CHAIN HOIST-JET151112 >
1-TON 20'-LIFT ELECTRIC CHAIN HOIST-JET151121 >
2-TON 10'-LIFT ELECTRIC CHAIN HOIST
3/8" VARIABLE SPEED REVERSING DRILL - JWH311353 >
3/8" UNI-DRILL-MAK6000LR>
Take on tough jobs with the 1/4 in. VSR Drill. Featuring heat-treated steel gears that deliver durability and a rubber grip for comfort, this tool is designed to get the job done.
The 100% ball bearing construction of the DW124K 1/2 in stud and joist drill kit provides durability and longer tool life. Take control by setting the mechanical slip clutch in low gear with the adjustable front handle and 2-position side handle and 21 in OAL.
DeWALTĀ® D21002 VSR Drill, 3/8 in Keyed Chuck, 120 VAC, 0 to 2500 rpm Speed, 9.6 in OAL, Tool Only
Black+DeckerĀ® DR260B VSR Drill/Driver Kit With Storage Bag, 3/8 in Keyless Chuck, 120 VAC
Ideal for drilling through a range of materials, this corded drill/driver features variable speed for extra control and on-board bit storage. A powerful 5.2 A motor tackles household tasks big and small.
3/8" VSR 5-AMP 2500-RPM ELECTRIC DRILL-BD-D21007 >
1/2" 7.8-AMP VSR DRILL WITH KEYLESS CHUCK-BD-DW236 >
28-PIECE RAPID LOAD, QUICK CHANGE SET-BD-DW2521 >
Recently Viewed
3.25" -OOVERALL LENGTH COMPRESSION SPRING; MAXIMUM LOAD 43.59 LBS.-AJA32 >
AnvilĀ® 0310088000 FIG 1125 Reducer, Coupling, 1-1/4 x 1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
MAXCO Inspire Seriesā¢ 100 Conn Link Cotter Pin Type, ASME/ANSI Standard Roller Chain, Single Strand, 1-1/4ā³ Pitch
2.25" -OVERALL LENGTH EXTENSION SPRINGS; MAXIMUM LOAD 4.45 LBS.-AJA3 >
GreenleeĀ® 12099 Adapter Screw, For Use With Slug-BusterĀ® Knockout Punch Kit and Ratchet Punch Driver Kit, 3/4-16 x 5/8-18
GreenleeĀ® 12099 Adapter Screw, For Use With Slug-BusterĀ® Knockout Punch Kit and Ratchet Punch Driver Kit, 3/4-16 x 5/8-18
10-MM X 1/4" 6-PT STANDARD SQUARE DRIVE SOCKET-APX10MM11 >
