Milwaukee® 0233-20 Double Insulated Heavy Duty Electric Drill, 3/8 in 1-Sleeve/Keyless Chuck, 120 VAC, 0 to 2800 rpm Speed, 10 in OAL
Built to handle industrial and construction applications with ease. The 3/8 in Magnum® drill with keyless chuck has the raw power of a Milwaukee® built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under 1 min.
-
BrandMilwaukee®
-
UPC045242000388
-
Manufacturer Part Number0233-20
-
CountryUSA|Canada
-
Tool/KitKit
-
Chuck Size3/8 in
-
Chuck Type1-Sleeve/Keyless
-
ColorBlack/Red
-
TypeDouble Insulated Heavy Duty
-
Handle TypePistol Grip
-
Voltage Rating120 V AC
-
Control TypeVariable Speed Trigger Switch
-
Amperage Rating5.5 A
-
Housing MaterialMetal
-
Speed0 to 2800 rpm
-
Overall Length10 in
- Powerful 5.5 A motor delivers upto 2800 rpm with trigger speed control and reverse
- Heavy duty keyless single sleeve all metal chuck for high grip strength and reduced slippage
- 8 ft 2-wire fixed rubber cord has durable construction for longer tool life
- Exclusive brush cartridge system changes brushes in less than 1 min and includes a spare set of brushes
- Capacity in wood 1-1/2 in flat boring bit, 1-3/4 in hole saw and metal capacity of 3/8 in twist bit
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 3ZW46 |
-
UNSPSC27112703
-
Package Description1/PK
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 years
-
Owners/User Manual
-
Instruction/Installation Manual
Recently Viewed
Milwaukee® 0233-20 Double Insulated Heavy Duty Electric Drill, 3/8 in 1-Sleeve/Keyless Chuck, 120 VAC, 0 to 2800 rpm Speed, 10 in OAL
Built to handle industrial and construction applications with ease. The 3/8 in Magnum® drill with keyless chuck has the raw power of a Milwaukee® built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under 1 min.
Proto® J5334CF Crowfoot Wrench, Imperial, 1-1/16 in Wrench, 1/2 in Drive, 2-7/8 in OAL, ASME B107.21, Full Polished
CPVC PIPE-NIBCPVCC80600>
HCI Preferred Supplier 38106 90 deg Tube-to-Pipe Elbow, 5/8 x 3/8 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38106 90 deg Tube-to-Pipe Elbow, 5/8 x 3/8 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
Square-D 30-AMP 4-POLE 208/240V CONTACTORS SQU 8910-DPA-34-V-09
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This four pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz, 220 VAC 50 Hz coil. The contactor has straight through wiring. Contactor is 3.78 inches by 2.75 inches and 3.04 tall. These contactors are UL component recognized and CSA certified.
Square-D 60-AMP 3-POLE 120-VOLT CONTACTORS SQU 8910-DPA-63-V-02
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 60 ampere and a resistive rating of 75 amperes. It also has a 5 HP at 115 VAC single phase, 10 HP at 230 VAC single phase and 25 HP at 230 VAC three phase, 30 HP at 460 VAC three phase and 30 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 4.06 inches by 2.56 inches and 3.67 tall. These contactors are UL component recognized and CSA certified.
