Electric Circular Saws
286265 DO-IT-BEST/HWI PRODUCTS
7" PORTABLE WET SAW. 1/3" HP, ADJUSTABLE CUTTING TABLE, 3400 RPM-JWH286265 >
311264 DO-IT-BEST/HWI PRODUCTS
POWER PRO 7-1/4" ELECTRIC CIRCULAR SAW - JWH311264 >
CS-1000 BLACK & DECKER / DEWALT
7-1/4" 12-AMP CIRCULAR SAWS-BD-CS1000 >
Makita® 5005BA Circular Saw, 5-1/2 in Dia Blade, 5/8 in Arbor/Shank, 1-3/4 in, 1-3/16 in Cutting, Left Blade Side
Makita® 5005BA Circular Saw, 5-1/2 in Dia Blade, 5/8 in Arbor/Shank, 1-3/4 in, 1-3/16 in Cutting, Left Blade Side
Makita® 5007F Circular Saw Kit, 7-1/4 in Blade, 5/8 in Arbor/Shank, 1-3/4 in at 45 deg, 2-3/8 in at 90 deg Cutting, Right Blade Side
Makita® engineered the 7-1/4 in circular saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications. Makita® built 15 A motor the 5007F has a powerful 15 A motor and a high power-to-weight ratio, with all ball bearing construction and a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The 5007F has a large cutting capacity (2-3/8 in at 90 deg, 1-3/4 in at 45 deg) with a maximum bevel capacity of 0 to 45 deg for the most common angles. Ease-of-use features Makita® engineered ease-of-use features into the saw with large and easy-to-read markings on the depth and bevel scales. Blade changes are more convenient with a flat motor housing design for increased stability when changing blades, with a conveniently located shaft lock for easy blade replacement. Visibility is improved with two built-in LED lights and a built-in dust blower engineered to clear the line of cut. Includes carbide tipped framing blade the 5007F includes a Makita® 7-1/4 in 24T general contractor framing blade for faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita® heat vents strategically set to dissipate heat and increase cutting performance. The 5007F also includes a blade wrench attached to the saw for fast and convenient blade changing. Engineered for a range of applications the 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4 in circular saw.
Milwaukee® 6370-21 Grounded Corded Circular Saw Kit, 8 in Dia Blade, 5/8 in Arbor/Shank, 2-9/16 in at 90 deg Cutting, Right Blade Side
Milwaukee's 8 in. metal cutting circular saw delivers faster, cooler, cleaner, more affordable metal cutting. Forget the showers of hot metal chips and sparks that were once an aerial threat on metal construction jobsites. The 6370 shears the metal, producing a virtually spark-free wake and cool, burr and scorch-free edges that don't require post-cut finishing. Cool cut waste, in the form of metal shavings, is effectively contained with a durable magnesium blade shield and channeled into the saw's integral chip tank. Cool cutting also means that materials can be handled almost immediately following a cut, reducing downtime.
Milwaukee® 6394-21 Corded Circular Saw, 7-1/4 in Dia Blade, 5/8 in Arbor/Shank, 1-13/16 in at 45 deg, 1-11/16 in at 50 deg, 2-7/16 in at 90 deg Cutting, Right Blade Side
The latest addition to Milwaukee® circular saw line features a patented adjustable main handle that provides users with maximum control and comfort. The handle position can be moved for the best ergonomic grip. Both front and rear handles have cushioned grips. A QUIK-LOK™ cord with a positive lock system, makes field replacement of the cord set easy and fast. A small button on the saw ensures positive lock. The power assisted brake stops the blade in seconds to repetitive cuts. At 10.6 lb and featuring a powerful Milwaukee® built 15 A motor, this saw provides the highest horsepower to weight ratio available in a 7-1/4 in saw. An aircraft aluminum shoe resists bending. Easy to reach depth and bevel adjustment knobs allow bevels to 50 deg.
Milwaukee® 6470-21 Corded Circular Saw Kit, 10-1/4 in Dia Blade, 5/8 in Arbor/Shank, 2-3/4 in at 45 deg, 1-3/4 in at 60 deg, 3-13/16 in at 90 deg Cutting, Right Blade Side
The 6470-21, 10-1/4 in. circular saw is built with the power and capacity to handle the most extreme cutting applications. The powerful 15 amp, 5,200 RPM motor delivers maximum power for high performance cutting without bogging down under load. An aircraft aluminum shoe will not bend or warp in extreme cutting applications. The electric brake increases productivity by stopping the blade in seconds. These heavy duty features combined with the 3-13/16 in. depth of cut capacity and 60° bevel capacity make the 6470-21 the most popular 10-1/4 in. circular saw in the industry.
Milwaukee® TILT-LOK 6390-20 Corded Circular Saw, 7-1/4 in Dia Blade, 5/8 in Arbor/Shank, 1-13/16 in at 45 deg, 1-11/16 in at 50 deg, 2-7/16 in at 90 deg Cutting, Right Blade Side
The TILT-LOK™ handle on Milwaukee® 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 lb and delivering 3.25 hp maximum, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 deg and offers superior visibility and a clear sight-line from either side. Helical steel gears and a 22 A switch are just two of the features that ensure the Milwaukee® reputation for durability.
Milwaukee® TILT-LOK 6390-21 Corded Circular Saw Kit, 7-1/4 in Dia Blade, 5/8 in Arbor/Shank, 1-13/16 in at 45 deg, 1-11/16 in at 50 deg, 2-7/16 in at 90 deg, 2-9/16 in at 90 deg Cutting, Right Blade Side
The Tilt-Lok™ handle on Milwaukee's 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 Lb. and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability.
Morse® 100977 Metal Devil® Electric Circular Saw, 9 in Blade, 1 in Arbor/Shank, 3-1/4 in Cutting, Right Blade Side
The Morse Metal Devil, CSM9NXTB (100977), 9" circular saw machine is portable and designed for cutting ferrous and non-ferrous metals. Running at 2300 rpm, slower than standard hand-held machines, this saw cuts metal fast, accurate, and with a burr-free finish. Safety features include a retractable blade guard and overload switch. A quick-release metal chip collection chamber is easily removed for emptying and allowing access for blade changes. Product is packaged with Morse Metal Devil, CSM948FSC, steel cutting blade. Installation required.
Porter-Cable® 314 Worm Drive Electric Circular Saw, 4-1/2 in Dia Blade, 3/8 in Arbor/Shank, 1-1/16 in at 45 deg, 1-5/16 in at 90 deg Cutting, Right Blade Side
Porter-Cable® 314 Worm Drive Electric Circular Saw, 4-1/2 in Dia Blade, 3/8 in Arbor/Shank, 1-1/16 in at 45 deg, 1-5/16 in at 90 deg Cutting, Right Blade Side
Recently Viewed
2-3/4" DRAW HASP-NTL208512 >
