Makita® 5007F Circular Saw Kit, 7-1/4 in Blade, 5/8 in Arbor/Shank, 1-3/4 in at 45 deg, 2-3/8 in at 90 deg Cutting, Right Blade Side
Makita® engineered the 7-1/4 in circular saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications. Makita® built 15 A motor the 5007F has a powerful 15 A motor and a high power-to-weight ratio, with all ball bearing construction and a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The 5007F has a large cutting capacity (2-3/8 in at 90 deg, 1-3/4 in at 45 deg) with a maximum bevel capacity of 0 to 45 deg for the most common angles. Ease-of-use features Makita® engineered ease-of-use features into the saw with large and easy-to-read markings on the depth and bevel scales. Blade changes are more convenient with a flat motor housing design for increased stability when changing blades, with a conveniently located shaft lock for easy blade replacement. Visibility is improved with two built-in LED lights and a built-in dust blower engineered to clear the line of cut. Includes carbide tipped framing blade the 5007F includes a Makita® 7-1/4 in 24T general contractor framing blade for faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita® heat vents strategically set to dissipate heat and increase cutting performance. The 5007F also includes a blade wrench attached to the saw for fast and convenient blade changing. Engineered for a range of applications the 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4 in circular saw.
-
BrandMakita®
-
UPC088381040181
-
Manufacturer Part Number5007F
-
CountryCanada
-
Tool/KitKit
-
Handle TypeD-Handle
-
Voltage Rating115 V AC
-
Amperage Rating15 A
-
Arbor/Shank Size5/8 in
-
Cutting Angle45/90 deg
-
Cutting Capacity1-3/4 in at 45 deg, 2-3/8 in at 90 deg
-
Housing MaterialPlastic
-
Cutting Edge MaterialCarbide
-
Dimensions12 in L
-
Bevel Capacity45 deg
-
Speed5800 rpm
-
Blade SideRight
-
Blade Size7-1/4 in
- Heavy duty aluminum base plate for jobsite durability
- LED job light with independent on/off switch
- Flat motor housing design increases stability when changing blades
- Powerful 15 A motor delivers 5800 rpm for proven performance and jobsite durability
- Lower guard design improves performance when making bevel and narrow cuts
- Large cutting capacity (2-3/8 in at 90 deg, 1-3/4 inch at 45 deg)
- Two built-in LED lights illuminate the line of cut for increased accuracy
- Well balanced design for superior handling and performance
- Ideal for framers, builders, forming and siding contractors
- Heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts
- Built-in dust blower clears the line of cut for greater accuracy
- Technologically-advanced centrifugal fan and baffle system for efficient cooling of the motor
- Large and easy to read markings on depth and bevel scales
- Conveniently located shaft lock for easy blade replacement
- AC/DC switch allows for use with alternative power sources
- All ball bearing construction engineered for longer tool life
- Double insulated
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 11V701 |
-
UNSPSC27112700
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Warranty1 Year Limited
-
Line Drawing
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Makita® 5007F Circular Saw Kit, 7-1/4 in Blade, 5/8 in Arbor/Shank, 1-3/4 in at 45 deg, 2-3/8 in at 90 deg Cutting, Right Blade Side
Makita® engineered the 7-1/4 in circular saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications. Makita® built 15 A motor the 5007F has a powerful 15 A motor and a high power-to-weight ratio, with all ball bearing construction and a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The 5007F has a large cutting capacity (2-3/8 in at 90 deg, 1-3/4 in at 45 deg) with a maximum bevel capacity of 0 to 45 deg for the most common angles. Ease-of-use features Makita® engineered ease-of-use features into the saw with large and easy-to-read markings on the depth and bevel scales. Blade changes are more convenient with a flat motor housing design for increased stability when changing blades, with a conveniently located shaft lock for easy blade replacement. Visibility is improved with two built-in LED lights and a built-in dust blower engineered to clear the line of cut. Includes carbide tipped framing blade the 5007F includes a Makita® 7-1/4 in 24T general contractor framing blade for faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita® heat vents strategically set to dissipate heat and increase cutting performance. The 5007F also includes a blade wrench attached to the saw for fast and convenient blade changing. Engineered for a range of applications the 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4 in circular saw.
10-MM X 1.25 THREAD REPAIR KIT -THR3221M10F >
INSSXV-115 Dodge® 130305 210 Intermediate Duty Collar Ball Bearing, 1-15/16 in Dia Bore, 3.5433 in OD, 1.72 in W, 7891 lb Dynamic/5213 lb Static Load
Dodge® 130305 210 Intermediate Duty Collar Ball Bearing, 1-15/16 in Dia Bore, 3.5433 in OD, 1.72 in W, 7891 lb Dynamic/5213 lb Static Load
1-QT TRUE BLUE HEAVY DUTY BATHROOM CLEANER-ML-RB309QT >
Guardair® 75XT036AA Classic+® Xtra Thrust® Safety Air Gun, Venturi Tip, 150 psi Working, 36 in L Tube, 1/4 in FNPT Thread, Aluminum/Zinc Alloy
Guardair's XtraThrust Series provides all the benefits of the Long John Series but with 40% more power. Ideal for the toughest applications and to move the heaviest debris, the XtraThrust nozzle generates over 300% more thrust compared to conventional air guns, yet limits static pressure to less than 30 psi should the tip become blocked. Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort.
Weiler® 13150 Single Row Cup Brush, 3-1/2 in Dia Brush, M10 x 1.25 Arbor Hole, 0.023 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
Weiler® 13150 Single Row Cup Brush, 3-1/2 in Dia Brush, M10x1.25 Arbor Hole, 0.023 in Dia Filament/Wire, Standard/Twist Knot, Steel Fill
