Sharkbite® U855W100 Tubing, 3/8 in Nominal, 0.35 in ID x 1/2 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite large-diameter Push-to-Connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT, or HDPE pipe in any combination. They are available in 1-1/4-IN, 1-1/2-IN and 2-IN CTS sizes. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
-
BrandSharkbite®
-
UPC697285604278
-
Manufacturer Part NumberU855W100
-
CountryUSA
-
Temperature Rating33 to 200 deg F
-
MaterialPEX
-
ColorWhite
-
Wall Thickness0.07 in
-
Nominal Size3/8 in
-
Working Pressure160 psi
-
Inside Diameter0.35 in
-
Domestic/ImportDomestic
-
Outside Diameter1/2 in
-
Length100 ft
-
End StyleCTS
- Manufactured without an oxygen barrier for potable water systems
- The tubing is printed with a SharkBite® imprint pattern that provides a visual aid to determine if the tube has been inserted all the way into the SharkBite® push-fit fitting
- This feature only works if the tubing is cut between the SharkBite® imprint pattern
- Strong, flexible, resilient tubing that provides superior temperature performance
- Flexibility: reduces the number of fittings needed to complete jobs, saving on overall cost and reducing leak points
- Chlorine and UV resistance: Highest-rated chlorine resistance, one month UV resistance
- Freeze resistance: PEX pipe is freeze-resistant and can expand slightly if frozen, PEX will contract back to its original form when thawed, PEX is not freeze-proof, PEX should be insulated to prevent freezing
- Insertion depth markings: Pre-printed insertion depth markings for SharkBite® Universal Push-to-Connect fittings
- Lead free
-
UNSPSC40180000
-
Standards/ApprovalsASTM F877-2011A|ASTM F876/877|AWWA C904|CSA B137.5-2009|ANSI/NSF 14/61/62
-
Warranty25 Years
-
Warranty Information
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Sharkbite® U855W100 Tubing, 3/8 in Nominal, 0.35 in ID x 1/2 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite large-diameter Push-to-Connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT, or HDPE pipe in any combination. They are available in 1-1/4-IN, 1-1/2-IN and 2-IN CTS sizes. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
INSSXR-100 Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 131908 205 Normal Duty Ball Insert Bearing, 1 in Dia Bore, 1.5748 in OD, 1.62 in W, 3146 lb Dynamic/1769 lb Static Load
Dodge® 083316 First Stage Pinion Gear, 9 Diametral Pitch, 9 Teeth, 0.9 in Dia Pitch
Dodge® 083316 First Stage Pinion Gear, 9 Diametral Pitch, 9 Teeth, 0.9 in Dia Pitch
FYH® UCFL208-24 2-Bolt Cylindrical Bore Normal Duty Oval Flange Mount Ball Bearing Unit With Set Screw, 1/2 in Dia Bore, 5-43/64 in L Bolt Center-to-Center, 5/8 in Dia Bolt Circle
FYH® UCFL208-24 2-Bolt Cylindrical Bore Normal Duty Oval Flange Mount Ball Bearing Unit With Set Screw, 1/2 in Dia Bore, 5-43/64 in L Bolt Center-to-Center, 5/8 in Dia Bolt Circle
Gates® Power Transmission Micro-V® 430J6 Heavy Duty V-Belt, J Section, 3/32 in W Top, 43 in L Outside, 5/32 in THK, Chloroprene
Gates Micro-V® belts ensure outstanding performance on any industrial multi-ribbed drive. They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more. Exclusive truncated (shortened) profile gives Gates Micro-V belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves. The full line of Micro-V belt products includes slabs in several widths as well as single belts in J, K, L and M sections in order to perfectly match customer requirements.
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
