Pyramex® SB7180S Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Black, Polycarbonate Frame, ANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
Pyramex® SB7180S Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Black, Polycarbonate Frame, ANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
-
BrandPyramex®
-
UPC814992003815
-
Manufacturer Part NumberSB7180S
-
CountryUSA
-
Temple StyleDual-Injected/Spatula
-
Frame ColorBlack
-
Frame MaterialPolycarbonate
-
UV ProtectionYes %
-
Specifications MetANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
-
Lens CoatingAnti-Scratch
-
Lens ColorIndoor/Outdoor Mirror
-
Lens MaterialPolycarbonate
-
Bridge Size14.5 mm
- PMXSLIM has a slim fit for smaller facial features
- Soft, adjustable PVC nosepiece
- Dual-injected temple design includes soft rubber tips for a non-slip fit
- Wraparound single lens design with incredible 10 curve base with side protection that extends to the temples
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- Spatula with soft tip end
- 99
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1|CE EN166|AUS NSZ 1337
-
Specification Sheet
Recently Viewed
Pyramex® SB7180S Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Black, Polycarbonate Frame, ANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
Pyramex® SB7180S Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Black, Polycarbonate Frame, ANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
Gates® Power Transmission Poly Chain® GT®2 8MX-38S-21 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.747 in OD, 38 Grooves, 3.81 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Sometimes you want to extend drying times to create a hard, protective and glossy finish. That's when Klean-Strip™ xylene can be used in place of toluene to thin specified oil based paint, lacquer, varnish, epoxy, adhesives and synthetic enamels. Xylene will also remove certain adhesives and is an excellent solvent for cleaning up spills, as well as tools and equipment immediately after use.
