Coilhose® N14-50B Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Swivel End Style, 50 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N14-50B Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Swivel End Style, 50 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
-
BrandCoilhose®
-
UPC029292275590
-
Manufacturer Part NumberN14-50B
-
CountryUSA
-
Temperature Rating-60 to 200 deg F
-
MaterialNylon
-
ColorYellow
-
Wall Thickness0.033 +/-0.003 in
-
Nominal Size1/4 in
-
SeriesN14
-
Working Pressure185 psi at 70 deg F
-
Domestic/ImportDomestic
-
Outside Diameter0.308 in
-
Length50 ft
-
End Style1/4 in MPT Swivel
- 19.1 in retracted length
- 40 ft working length
- 3-1/2 in OD coil
- This lightweight, permanently-coiled hose is manufactured from tough, abrasion resistant nylon 11
- Each assembly is supplied with durable brass compression fittings, tube inserts and hose ferrules
- Spring guards for additional strain relief are also provided on all assemblies, except 3/4 in
- Heavy duty brass fittings assure longer service life in rugged industrial environments
- High quality nylon 11 formulation resists moisture absorption, making it the superior nylon tubing choice for most applications
-
UNSPSC40142002
-
Package Description1/PK
-
Catalog
-
Specification Sheet
Recently Viewed
Coilhose® N14-50B Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Swivel End Style, 50 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N14-50B Coiled Air Hose, 1/4 in Nominal, 1/4 in MPT Swivel End Style, 50 ft L, 185 psi at 70 deg F Working, Nylon, Domestic
The NIBCO 829020 (often stylized as 829-020) is a 2-inch Schedule 80 PVC straight pipe coupling designed for high-pressure fluid applications. It is used to connect two sections of 2-inch PVC pipe traveling in the same direction.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
5" COARSE 60-GRIT ADHESIVE-BACKED SANDING DISC--4 PACK - JWH301345 >
7" X 7/8" 36-GRIT FIBER DISC-PEAFD7036X >
