Reelcraft 3/8" X 50' PRESSURE WASH HOSE REEL REC PW-7600-OHP
Compact design and quality steel construction are incorporated into Reelcraft's line of pressure wash reels, rated up to 4500 psi. The reels can handle from 50 to 400 ft of hose and are complete with a high pressure water swivel for maximum product delivery.
-
BrandReelcraft®
-
UPC699567005681
-
Manufacturer Part NumberPW7600 OHP
-
CountryUSA
-
FinishPowder Coated
-
MaterialReinforced Stainless Steel
-
Pressure Rating5000 psi
-
Reel Diameter19-3/4 in
-
Reel Width3-7/8 in
-
ColorRed
-
TypeHigh Pressure Spring Drive
-
Mounting TypeBench/Ceiling/Floor/Truck/Wall
-
Seal TypeAflas®
-
Series7000
-
Hose Capacity3/8 in ID x 0.73 in OD x 50 ft L
-
Dimensions20-1/4 in H x 19-3/4 in W x 7 in D
-
Domestic/ImportDomestic
-
Drive TypeRetractable Spring
-
Swivel MaterialNickel Plated Steel
- Designed to handle a broad range of pressures, temperatures and chemicals
- Full flow stress free swivel design - full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life
- Hose is plumbed into the base to eliminate the risk of undue stress on the swivel
- Individually powder coated components offer the maximum protection from premature corrosion
- Steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight1/2 in female NPTF inlet
- 1/2 in female NPTF outlet
-
UNSPSC40142022
-
Package Description1/PK
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
Compact design and quality steel construction are incorporated into Reelcraft's line of pressure wash reels, rated up to 4500 psi. The reels can handle from 50 to 400 ft of hose and are complete with a high pressure water swivel for maximum product delivery.
SUNBEAM FUSION SPRAY PAINT-KRY2330 >
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
10" 4-GA BLACK TOP POST CABLE-PRI00784 >
Gates® Power Transmission MegaCrimp™ 4G-2FP G25 Straight Hydraulic Coupling, 1/4 in x 1/8-27 Nominal, Hose x Female NPTF, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
Gates® Power Transmission Tri-Power® CX330 Banded Heavy Duty Cut Notch V-Belt, CX Section, 7/8 in W Top, 332 in L Outside, 17/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
