Reelcraft 3/8" X 50' S/STEEL HOSE REELS REC 7600-OMS-55
Reelcraft's stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical transfer, and industrial-solvent handling. Also suitable for coastal, offshore and on-board ship in marine applications where the harsh salt water spray environment requiring stainless steel reels.
-
BrandReelcraft®
-
UPC699567006954
-
Manufacturer Part Number7600 OMS55
-
CountryUSA
-
MaterialStainless Steel
-
Pressure Rating3000 psi
-
TypeFull Flow Swivel
-
Mounting TypeCeiling/Wall
-
Series7000
-
Hose Capacity3/8 in ID x 0.71 in OD x 66 ft L
-
Dimensions19 in L x 7 in W x 20-1/4 in H
-
Domestic/ImportDomestic
-
Drive TypeSpring
- Reinforced steel - the steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight
- Full flow stress free swivel design - the full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life
- The hose is plumbed into the base to eliminate the risk of undue stress on the swivel
- Long life drive spring - declutching arbor virtually eliminates possibility of spring damage due to reverse winding
- Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life
- 3/8 in female NPTF inlet
- 3/8 in female NPTF outlet
- 210 deg F maximum temperature rating
- Without hose
-
UNSPSC40142022
-
Package Description1/PK
-
Standards/ApprovalsPROP65: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Recently Viewed
Reelcraft's stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical transfer, and industrial-solvent handling. Also suitable for coastal, offshore and on-board ship in marine applications where the harsh salt water spray environment requiring stainless steel reels.
LOCTITE® 518™ is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE® 518™ cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE® 518™ fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.
Weiler® 00274 TLN-3 Narrow Face Wheel Brush, 3 in Dia Brush, 7/16 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 3/8 to 1/2 in Arbor Hole
Weiler® 00274 TLN-3 Narrow Face Wheel Brush, 3 in Dia Brush, 7/16 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 3/8 in Arbor Hole
AUTUMN HEATHER AIR DISPENSER REFILL-MIS20912AH >
3-PIECE HOBBY PAINT BRUSHES - JWH970573 >
500-A-1-TL-1-1/8-FB 500a Torque Limiter
500A TORQUE LIMITER - BRW500A1TL11/8FB>
