Push to Connect Fittings
WATTSĀ® 17103031 Quick-Connect Coupling, 1/2 x 3/8 in Nominal, Tube OD End Style, Polypropylene, Import
This 1/2 inch OD x 3/8 inch OD AquaLock(TM) mini reducing coupling works with plastic or soft copper tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
WATTSĀ® 17103020 Quick-Connect Coupling, 3/8 in Nominal, Tube OD End Style, Polypropylene, Import
This 3/8 inch OD AquaLock(TM) mini coupling works with plastic or soft copper tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
SharkbiteĀ® UR256 Elbow, 3/4 in Nominal, Push-to-Connect End Style, Lead-Free DZR Brass
SharkbiteĀ® UR256 Elbow, 3/4 in Nominal, Push-to-Connect End Style, Lead-Free DZR Brass
SharkbiteĀ® U514LF Pipe End Cap, 1/2 in Nominal, Push-Fit End Style, Brass, Import
SharkBiteĀ® End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBiteĀ® fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.
SharkbiteĀ® U280 Pipe Elbow, 1/2 in Nominal, Push-Fit x MNPT End Style, Brass, Domestic
SharkBiteĀ® U280 Elbow 1/2 in MNPT x 1/2 in. The Elbow allows you to easily add another line off of existing plumbing. It can be used to connect to CPVC, copper or PEX tubing. Simply cut the pipe and push on the fitting. SharkBiteĀ® fittings can easily be removed and are reusable.
Sea TechĀ® 0959139 35 Series Type 23 Quick-Connect Union Tee, 3/4 in Nominal, CTS End Style, Polysulfone, Import
This 3/4 in CTS AquaLockā¢ plastic tee works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
Sea TechĀ® 0959033 35 Series Type 01 Quick-Connect Male Adapter, 3/8 in Nominal, CTS x MNPT End Style, Polysulfone, Import
This 3/8 inch CTS x 3/8 inch NPT AquaLock(TM) plastic male adapter works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
PMS-6-6 3/8x3/8" National Pipe Thread Male Swivel
3/8X3/8" NATIONAL PIPE THREAD MALE SWIVEL SELF-GRIP-FTGPMS66 >
John GuestĀ® SpeedfitĀ® PEI0428 Coupler, 3/4 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
John GuestĀ® SpeedfitĀ® PEI0420 Coupler, 1/2 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
John GuestĀ® SpeedfitĀ® PEI0228 Union Tee, 3/4 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
John GuestĀ® SpeedfitĀ® PEI0220 Union Tee, 1/2 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
John GuestĀ® SpeedfitĀ® 3/4SCP Slip Connector, 3/4 in Nominal, CTS End Style, Plastic, Domestic
An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide.
John GuestĀ® PI0412S Straight Equal Union Connector, 3/8 in Nominal, Tube OD End Style, Acetal Copolymer
The PI Range of inch-size push-in fittings is offered for tube sizes 5/32 to 5/8 in OD. The fittings are manufactured in gray acetal copolymer with food grade nitrile O-Ring, making them especially suitable for applications involving foodstuff and potable liquids. They are also suitable for air and inert gases and can therefore be used on CO2 lines, pneumatic applications and vacuum.
HCI Preferred Supplier 20859 Swivel 90 deg Tube to Pipe Elbow, 6xM5 Nominal, Push-In x BSPT End Style, Nickel Plated Brass/Composite Polyacetal
HCI Preferred Supplier 20859 Swivel 90 deg Tube to Pipe Elbow, 6xM5 Nominal, Push-In x BSPT End Style, Nickel Plated Brass/Composite Polyacetal
HCI Preferred Supplier 20808 Union Elbow, 12 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20808 Union Elbow, 12 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20807N 90 deg Union Elbow, 10 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20807N 90 deg Union Elbow, 10 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20736N Bulkhead Union, 10 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20736N Bulkhead Union, 10 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20735N Bulkhead Union, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20735N Bulkhead Union, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20727N Bulkhead Union, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20727N Bulkhead Union, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20707N Straight Tube Adapter, 14 mm Nominal, Push-In x MIP End Style, Brass
HCI Preferred Supplier 20707N Straight Tube Adapter, 14 mm Nominal, Push-In x MIP End Style, Brass
HCI Preferred Supplier 20661N 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20661N 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20661 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20661 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass
Recently Viewed
GatesĀ® Power Transmission Poly ChainĀ® GTĀ® Carbonā¢ 14MGT-1610-68 Synchronous Belt, 68 mm W, 1610 mm OAL, 14 mm Pitch, 115 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the GatesĀ® Poly ChainĀ® GTĀ® Carbonā¢ drive system instead of roller chain in your next power transmission application. The patented use of Carbonā¢ Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility, allowing the use of backside idlers. When combined with GatesĀ® Poly ChainĀ® GTĀ®2 sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
BrowningĀ® 767297 VPLE 100 Intermediate Duty Pillow Block Ball Bearing, 7/8 in Dia Bore, 3-23/32 to 4-17/32 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-11/16 in OAH
BrowningĀ® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
1/2 -MALE PIPE THREADX2 METAL BLACK NIPPLE
DixonĀ® BFN150 Industrial Fog Nozzle With Bumper, 1-1/2 in Inlet, Brass Body
MorseĀ® XF9000 1-Piece Horizontal Standard Base Kit, For Use With RaiderĀ® Plus Styles UT, UB, QT, CT, CB, CRT, UHMT, UHMB, QHMT, QHMB, CHMT, CHMB, Size 2.37 in Center Distance Worm Gear Reducer, Cast Iron
MorseĀ® XF9000 1-Piece Horizontal Standard Base Kit, For Use With RaiderĀ® Plus Styles UT, UB, QT, CT, CB, CRT, UHMT, UHMB, QHMT, QHMB, CHMT, CHMB, Size 2.37 in Center Distance Worm Gear Reducer, Cast Iron
TYPE-4 SIZE-3-W WELDING NOZZLES-FOR87835>
