John Guest® Speedfit® PEI0420 Coupler, 1/2 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
-
BrandJohn Guest®
-
UPC665628021181
-
Manufacturer Part NumberPEI0420
-
CountryUSA
-
Temperature Rating200 deg F
-
MaterialPlastic
-
Fitting/Connector TypeCoupling
-
Pressure Rating160 psi
-
ColorWhite
-
Nominal Size1/2 in
-
Domestic/ImportDomestic
-
End StyleCTS
- Push-fit connections
- Speedfit fittings can be used with - PEX, Copper and CPVC Pipes conforming to ASTM Standards
- Speedfit fittings cannot be used on stainless steel pipe
- Fittings are manufactured from high quality engineered plastic with EPDM O-rings
- Speedfit push-in system is suitable for hot and cold water plumbing applications
- Truly demountable without damage to pipe or fitting
- No risk of fire or flames
- Corrosion free and no scale build-up
- Working pressures and temperatures: 160 psi at 73 deg F, 100 psi at 180 deg F, 80 psi at 200 deg F
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | JPEI0420 |
-
UNSPSC40183107
-
Package Description40/BX
-
Standards/ApprovalscUPC Listed|ESR No 1931|NSF 61
-
Catalog
Recently Viewed
John Guest® Speedfit® PEI0420 Coupler, 1/2 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
TIP CLEANER-OXYGEN-ACETYLENE-LONG-FOR30245 >
Dixon® The Right Connection™ B4 Boss™ 2-Bolt Hose Clamp, 1/2 in ID x 60/64 to 1-4/64 in OD, Malleable Iron Band, Domestic
Dixon® The Right Connection™ B4 Boss™ 2-Bolt Hose Clamp, 1/2 in ID x 60/64 to 1-4/64 in OD, Malleable Iron Band, Domestic
HCI Preferred Supplier 18005 Ferrule Tube Sleeve, 3/8 in, Compression, Brass
HCI Preferred Supplier 18005 Ferrule Tube Sleeve, 3/8 in, Compression, Brass
Sharkbite® U514LF Pipe End Cap, 1/2 in Nominal, Push-Fit End Style, Brass, Import
SharkBite® End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite® fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.
Browning® PD9202 Motor Mount Adapter, For Use With TorqTaper® Plus Size 115-203SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1 Speed Reducer, Steel
Browning® PD9202 Motor Mount Adapter, For Use With TorqTaper® Plus Size 115-203SMTP/SMFP Ratio 5:1/9:1/15:1/25:1/35:1 Speed Reducer, Steel
