Push to Connect Fittings

This 1/2 inch OD x 3/8 inch OD AquaLock(TM) mini reducing coupling works with plastic or soft copper tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.

This 3/8 inch OD AquaLock(TM) mini coupling works with plastic or soft copper tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.

1/4" SELF-GRIP HOSE UNIONS-FTGUN04 >

Sharkbite® UR256 Elbow, 3/4 in Nominal, Push-to-Connect End Style, Lead-Free DZR Brass

SharkBite® End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite® fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.

SharkBite® U280 Elbow 1/2 in MNPT x 1/2 in. The Elbow allows you to easily add another line off of existing plumbing. It can be used to connect to CPVC, copper or PEX tubing. Simply cut the pipe and push on the fitting. SharkBite® fittings can easily be removed and are reusable.

This 3/4 in CTS AquaLock™ plastic tee works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.

This 3/8 inch CTS x 3/8 inch NPT AquaLock(TM) plastic male adapter works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.

3/8X3/8" NATIONAL PIPE THREAD MALE SWIVEL SELF-GRIP-FTGPMS66 >

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.

Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.

An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide.

The PI Range of inch-size push-in fittings is offered for tube sizes 5/32 to 5/8 in OD. The fittings are manufactured in gray acetal copolymer with food grade nitrile O-Ring, making them especially suitable for applications involving foodstuff and potable liquids. They are also suitable for air and inert gases and can therefore be used on CO2 lines, pneumatic applications and vacuum.

HCI Preferred Supplier 20859 Swivel 90 deg Tube to Pipe Elbow, 6xM5 Nominal, Push-In x BSPT End Style, Nickel Plated Brass/Composite Polyacetal

HCI Preferred Supplier 20808 Union Elbow, 12 mm Nominal, Push-In End Style, Brass

HCI Preferred Supplier 20807N 90 deg Union Elbow, 10 mm Nominal, Push-In End Style, Brass

HCI Preferred Supplier 20736N Bulkhead Union, 10 mm Nominal, Push-In End Style, Brass

HCI Preferred Supplier 20735N Bulkhead Union, 8 mm Nominal, Push-In End Style, Brass

HCI Preferred Supplier 20727N Bulkhead Union, 8 mm Nominal, Push-In End Style, Brass

HCI Preferred Supplier 20707N Straight Tube Adapter, 14 mm Nominal, Push-In x MIP End Style, Brass

HCI Preferred Supplier 20661N 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass

HCI Preferred Supplier 20661 90 deg Union Elbow, 8 mm Nominal, Push-In End Style, Brass