Dixon® BU9 Boss™ 2-Bolt Clamp, 3/4 in ID x 1-10/64 to 1-20/64 in OD, Iron Band
Dixon® BU9 Boss™ 2-Bolt Clamp, 3/4 in ID x 1-10/64 to 1-20/64 in OD, Iron Band
-
BrandDixon®
-
Manufacturer Part NumberBU9
-
CountryUSA
-
FinishZinc Plated
-
Torque Rating21 ft-lb
-
Width2-9/16 in
-
SeriesBoss™
-
Band MaterialIron
-
Inside Diameter3/4 in
-
Outside Diameter1-10/64 to 1-20/64 in
-
Bolt Size9/16 in Hex
-
Length2-31/32 in
- Recommended for steam service up to 450 deg F
- Replacement nuts and bolts are available
- Two gripping fingers and two clamps sections
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
- These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts
- The use of lubricant on bolts will adversely effect clamps performance
- Do not lubricate nuts and bolts
- Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter
- Always tighten bolts to their specified torque values
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
- Boss clamps are for single use only, once removed they are to be discarded
- Warning: this products contains a chemicals known to the State of California to caused birth defects or other reproductive harm
- Do not use in connections with drinking water
- Wash hands after handling
- Global investment cast carbon steel
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 58CY50 |
-
UNSPSC31162906
-
Package Description50/BX
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Dixon® BU9 Boss™ 2-Bolt Clamp, 3/4 in ID x 1-10/64 to 1-20/64 in OD, Iron Band
Dixon® BU9 Boss™ 2-Bolt Clamp, 3/4 in ID x 1-10/64 to 1-20/64 in OD, Iron Band
4-MORBX4-FPX90 HYDRAULIC ADAPTER-DAY6444 >
The Coilhose Pneumatics NV4302 is a brass pneumatic needle valve designed for precision control of airflow and water lines. It is manufactured in the United States and features an integrated adjustment knob to finely regulate fluid or air passage.
Dixon® B9 Boss™ 2-Bolt Clamp, 1-20/64 to 1-32/64 in Nominal, Iron Band
2-MJIC X 2-MJIC HYD/ADAPTERS-DAY24032>
ALFAGOMMA® B-0808-FO45 B Series One-Piece Hose Fitting, 1/2 in Hose, 13/16-16 Connection, Hose x Female End Style, 47.1 mm Cutoff Allowance, Import
ALFAGOMMA® B-0808-FO45 B Series One-Piece Hose Fitting, 1/2 in Hose, 13/16-16 Connection, Hose x Female End Style, 47.1 mm Cutoff Allowance, Import

