Dixon® PPD50 Type D Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x FNPT End Style, Polypropylene
Dixon® PPD50 Type D Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x FNPT End Style, Polypropylene
-
BrandDixon®
-
Manufacturer Part NumberPPD50
-
CountryUSA
-
MaterialPolypropylene
-
Fitting/Connector TypeCoupling
-
Pressure Rating125 psi
-
TypeType D
-
Nominal Size3/4 x 1/2 in
-
End StyleFemale Coupler x FNPT
- Manufactured from a glass-filled polypropylene
- Supplied with EPDM gaskets, 304 stainless steel handles and pins
- Polypropylene cam and groove should not be mixed with metal fittings
- 1/2 in couplers and adapters will interchange with 3/4 in couplers and adapters, only the threads and barbs are 1/2 in
- EPDM seal
- Pressure rating recommendations are based on the use of mating Dixon® fittings at ambient temperature 70 deg F with a standard seal installed
- Not recommended for use with PTFE gaskets
- 125 psi at ambient temperature 70 deg F pressure
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | DPPD50 |
-
UNSPSC40141734
-
Package Description24/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® PPD50 Type D Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x FNPT End Style, Polypropylene
Dixon® PPD50 Type D Cam and Groove Coupler, 3/4 x 1/2 in Nominal, Female Coupler x FNPT End Style, Polypropylene
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
