NIBCO 3/4" X 1/2" SCH-80 PVC SXS BUSHING NIB 837-101
Type: Flush Reducer Bushing Size: 3/4" Male Spigot x 1/2" Female Socket (Slip)Material: Dark Gray Polyvinyl Chloride (PVC)Wall Thickness: Schedule 80 (Thicker, higher-pressure rating than standard white Schedule 40 plumbing) Maximum Temperature: 140°F (60°C) Standards: ASTM D1784, ASTM D2467, and NSF certified for potable (drinking)
-
BrandLasco®
-
UPC025528720872
-
Manufacturer Part Number837-101
-
CountryUSA
-
Temperature Rating73 deg F
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Method of ManufactureInjection-Molded
-
ColorGray
-
TypeFlush
-
Schedule RatingSCH 80/XH
-
Nominal Size3/4 x 1/2 in
-
Hex Size1-3/32 in OD
-
Domestic/ImportDomestic
-
Length1-1/16 in
-
End StyleSpigot x Slip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM D-2464: Threaded poly vinyl chloride (PVC) plastic pipe fittings SCH 80/XH
- ASTM D-2467: Socket type poly vinyl chloride (PVC) plastic pipe fittings
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953)
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172308
-
Package Description25/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2464|ASTM D2467|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Specification Sheet
-
Catalog
Recently Viewed
Type: Flush Reducer Bushing Size: 3/4" Male Spigot x 1/2" Female Socket (Slip)Material: Dark Gray Polyvinyl Chloride (PVC)Wall Thickness: Schedule 80 (Thicker, higher-pressure rating than standard white Schedule 40 plumbing) Maximum Temperature: 140°F (60°C) Standards: ASTM D1784, ASTM D2467, and NSF certified for potable (drinking)
3/4X115X6/10T 115" X 3/4" Bm Bandsaw Blade
115" X 3/4" BM BANDSAW BLADE-MLF3/4X115X6/10T >
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
Anvil® 0310024203 FIG 1102 Standard 45 deg Pipe Elbow, 1-1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
765775 DO-IT-BEST/SPECTRACIDE BUG STOP HOME BARRIER 1 GAL. READY TO USE TRIGGER SPRAY INSECT KILLER
SPECTRACIDE IS CLEAR, ODORLESS, AND NON-STAINING. IT KILLS ON CONTACT AND LAST UP TO 12 MONTHS OF INSECT CONTROL.
-JWH765775 >
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
