Charlotte PVC 00323 1000, 2 in nominal, Spigot x Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140Ā° F. PVC is lightweight and
-
BrandCharlotte
-
UPC611942034093
-
Manufacturer Part NumberPVC 00323 1000
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector Type45 deg Elbow
-
Pressure Rating150 psi
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size2 in
-
Domestic/ImportDomestic
-
End StyleSpigot x Hub
- Easy to install
- PVC is lightweight, requires no special tools for cutting and is installed by solvent cementing
- Uniform interior and exterior
- Style number: P323
| Cross-Reference Number |
|---|
| 415900 |
-
UNSPSC40172808
-
Package DescriptionEACH
-
Standards/ApprovalsASTM D1784|ASTM D2665|ASTM D3311|NSF 14
-
Warranty5 Years Limited
-
SDS
-
Warranty Information
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Charlotte PVC 00323 1000, 2 in nominal, Spigot x Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140Ā° F. PVC is lightweight and
Rust-OleumĀ® 745402 7400 System 1-Component DTM Alkyd Enamel Coating, 1 gal Container, Liquid Form, Tile Red, 230 to 390 sq-ft/gal Coverage
Charlotte PVC 00400 0800, Tee, 1-1/2 in nominal, Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140Ā° F. PVC is lightweight and
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
UltratiteĀ® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
Premium belts have the highest power density of any V-belt and stretch dramatically less than standard cross sections. That's why they're ideal for use on problem drives requiring high-impact strength and load-carrying power. Replaces several belts with the strength of a single belt. Banded belts feature a multiple layer tie band that provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.
