PEX Elbows
1-1/4" -FEMALE PIPE THREADX1" -FEMALE PIPE THREAD GALVANIZED REDUCER-FIT11/4X1GR >
1-1/4" X 1" 90-DEGREE GALVANIZED ELBOW-JPW11/4X1GE >
1-1/4" X 3/4" 90 DEGREE GALVANIZED ELBOW-FIT11/4X3/4GE >
1-1/4" X 3/4" 90-DEGREE GALVANIZED ELBOW-JPW11/4X3/4GE >
1" -FEMALE PIPE THREAD 45-DEGREE METAL GALVANIZED ELBOW-JPW1G45 >
1" -FEMALE PIPE THREAD 90-DEGREE GALVANIZED ELBOW-JPW1GE >
1" -FEMALE PIPE THREAD/MPT GALVANIZED STREET ELBOW-JPW1GSTE >
1/2" -FEMALE PIPE THREAD 45-D GALVANIZED ELBOW-FIT1/2G45 >
1/2" -FEMALE PIPE THREAD 45-DEGREE GALVANIZED ELBOW-JPW1/2G45 >
1/2" 45-D GALVANIZED STREET ELBOW-FIT1/2G45STE >
1/2" -FEMALE PIPE THREAD 90 DEGREE GALVANIZED ELBOW-FIT1/2GE >
1/2" -FEMALE PIPE THREAD-MPT GALVANIZED STREET ELBOW-FIT1/2GSTE >
1/2" -FEMALE PIPE THREAD 90-DEGREE GALVANIZED ELBOW-JPW1/2GE >
1/2" GALVANIZED STREET ELBOW-JPW1/2GSTE >
1/2" -FEMALE PIPE THREAD-MPT STAINLESS STEEL STREET ELBOW-FIT1/2SSSTE >
1/2X3/8-G-E 1/2" X 3/8" 90 Degree Galvanized
1/2" X 3/8" 90 DEGREE GALVANIZED ELBOW-FIT1/2X3/8GE >
1/4" -FEMALE PIPE THREAD 45-D GALVANIZED ELBOW-FIT1/4G45 >
1/4" 45-DEGREE GALVANIZED ELBOW-JPW1/4G45 >
1/4" 45-DEGREE GALVANIZED STREET ELBOW-JPW1/4G45STE >
1/4" -FEMALE PIPE THREAD METAL 90 DEGREE GALVANIZED ELBOW-FIT1/4GE >
1/4" -FEMALE PIPE THREAD METAL 90-DEGREE GALVANIZED ELBOW-JPW1/4GE >
1/4" -MPT-FEMALE PIPE THREAD GALVANIZED STREET ELBOW-FIT1/4GSTE >
1/4" METAL GALVANIZED STREET ELBOW-JPW1/4GSTE >
1/4" STAINLESS STEEL STREET ELBOW-FIT1/4SSSTE >
Recently Viewed
Campbell® 6423108 GX Series Structural Short Leg Plate Clamp, 2 ton Load, 1/16 to 7/8 in Jaw Opening, 5-1/8 in OAW, Forged Steel, Load Activated Locking
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Dichtomatik N70013 O-Ring, 013 Dash Number, 0.426 in ID x 0.566 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
3/8" X 1-1/2" EXTRA HEAVY OVAL DIE SPRINGS-LANSEHO375150 >
1-3/8" -ID 1-9/16" -OD VITON O-RINGS
BLACK SILICONE TAPE-GNT66260 >
GP® 8034 Standard Length Socket Set, 6 Points, 3/4 in Drive, 8 Pieces, Included Socket Size: 1 to 1-1/2 in, Molded Storage Case Container
GP® 8034 Standard Length Socket Set, 6 Points, 3/4 in Drive, 8 Pieces, Included Socket Size: 1 to 1-1/2 in, Molded Storage Case Container
