RIDGID® 73162 Hinged Pipe Cutter, 2 to 4 in Nominal
Designed for rapid cutting of 2 in (50 mm) to 12 in (300 mm) steel pipe, heavy-wall steel pipe and cast-iron pipe.
-
BrandRIDGID®
-
UPC095691731623
-
Manufacturer Part Number73162
-
CountryUSA
-
FinishRed
-
Nominal Capacity2 to 4 in
-
Applicable MaterialsSteel, Heavy-Wall Steel and Cast Iron
-
Body MaterialMetal
- Second handle included for 466, 472 and 468 models make two-man leverage possible for large pipe sizes
- The 11 models operate with minimal cutter rotation as necessary for tight quarters
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | RID73162 |
-
Alternative Part Number424-S
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyLifetime
-
Instruction/Installation Manual
-
Owners/User Manual
Recently Viewed
Designed for rapid cutting of 2 in (50 mm) to 12 in (300 mm) steel pipe, heavy-wall steel pipe and cast-iron pipe.
5/8"-ID NEEDLE BEARINGS-INATC1018>
Sloan® Royal® 3910004 110 Single-Flush Manual Exposed Flushometer, 4 gpf, 1 in IPS Inlet, 1-1/2 in Spud, 15 to 80 psi, Polished Chrome
BBI 042450 Partially Threaded Cap Screw, 5/8-11, 5 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042450 Partially Threaded Cap Screw, 5/8-11, 5 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Browning® 1045491 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
3/8" X 3" M/D OVAL DIE SPRINGS-LANSMDO375300 >
