3-THRFLANGE250# 3" 250# Threaded Pipe Flange-jpw3thrflange250#
3" 250# THREADED PIPE FLANGE-JPW3THRFLANGE250#>
Recently Viewed
3" 250# THREADED PIPE FLANGE-JPW3THRFLANGE250#>
8 X 22 X 7 BALL BEARING-MWK02040845>
Crosby® 1018534, G-209-1, Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018534 Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
Browning® 1296482 T55L Automatic Torque Limiter, 1 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Wilton Classic 400 series c-clamps are ideal for steel fabrication, industrial maintenance and repair operations. Each c-clamp is drop forged and features an ACME rolled spindle with black oxide coating, replaceable Perma-Pads® and a V-grooved anvil for secure holding of all materials.
DOUBLE SHIELDED MINI BALL BEARING-GUL1602ZZ >
