ISOSTATIC™ Oilube® 402236 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 402236 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802071912
-
Manufacturer Part Number402236
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter1 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width5/8 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/4 in
-
Bore Diameter5/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberBSF-2024-10
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 402236 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 402236 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
Browning® 1296482 T55L Automatic Torque Limiter, 1 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Coilhose® SC692502 Econolock Speed Control Elbow, For Use With: Pneumatic Actuators, 1/8 in MNPT Port, Brass
Coilhose's 90 deg speed controls are used to control the speed of pneumatic devices, such as air cylinders. These "free flow in/metered flow out" controls are adjustable via a knurled knob and feature a locking nut to retain the setting. Ideal for use directly on pneumatic actuators.
72"-H X 36"-W X 24"-D HALLOWELL GRAY STORAGE CABINET - HLW415S24HG >
1/2" X 1-1/2" Clip Head Plow Bolt
3/8" X 36" Square Plain Keystock
