Rust-Oleum 1-GALLON SILVER GRAY EPOXY PAINT RUS 9182
This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of Rust-Oleum High Performance 9100 System DTM Epoxy Mastic is equal to multiple coats of a regular epoxy coating. It offers multiple activator options for unique industrial coating applications
-
BrandRust-Oleum®
-
UPC020066918231
-
Manufacturer Part Number9182300
-
CountryUSA|Canada
-
Temperature Rating40 to 60 deg F
-
FinishGlossy
-
Chemical CompositionBisphenol A Epoxy Resin, Hydrous Magnesium Silicate, Xylene (Mixed Isomers), Titanium Dioxide, Methyl Isobutyl Ketone, Ethylbenzene, Hydrocarbon Resin, Toluene
-
FormLiquid
-
ColorSilver Gray
-
Type2-Component
-
VOC Content<340 g/L
-
Container Size5 gal
-
Container TypePail
-
Coverage125 to 225 sq-ft/gal
-
Series9100 System
-
Curing Time7 days
-
Base TypeSolvent
-
Odor/ScentSolvent
- The 9100 system DTM epoxy mastic is a two component, high solids, rust inhibitive epoxy coating for use in moderate to severe environments
- It is specifically designed for application directly on sound rusted steel with minimum surface preparation
- It can also be used on clean steel, galvanized metal, concrete and previously coated surfaces with proper surface preparation
- This coating is impervious to moisture and easily cleaned and sanitized
- This versatile epoxy coating quickly creates a tough, durable, protective surface
- One coat of Rust-Oleum high performance 9100 system DTM epoxy mastic is equal to multiple coats of competitive epoxy
- Direct-to-metal (DTM) self-priming formula adheres to a variety of substrates
- Superior long term resistance to solvents, chemicals, abrasion and impact
- Convenient 1:1 mixing ratio, no measuring required
- Two-year rust proof guarantee - maximum corrosion protection
- 1.375 relative density
- 33 deg C flash point
- No VOCs, no HAPs and no odor
- No VOCs, no HAPs and no odor
- Self-priming
- Self-priming
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 4CH79 |
-
UNSPSC31211500
-
Package Description1/PK
-
SDS
-
Specification Sheet
Recently Viewed
This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of Rust-Oleum High Performance 9100 System DTM Epoxy Mastic is equal to multiple coats of a regular epoxy coating. It offers multiple activator options for unique industrial coating applications
Browning® 767892 VPLE 200 Normal Duty Low Base Pillow Block Ball Bearing Unit, 7/8 in Dia Bore, 3-11/16 to 4-9/16 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
United Abrasives-SAIT 23002 Thin High Speed Cut-Off Wheel, 2 in Dia x 1/16 in THK, 3/8 in Center Hole, A36T Grit, Aluminum Oxide Abrasive
1 -FEMALE PIPE THREAD 45-D METAL GALVANIZED ELBOW
Dichtomatik 75102028 O-Ring, 033 Dash Number, 1.989 in ID x 2.129 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
