Gates® Power Transmission Polyflex® 7M710 Light Duty V-Belt, 7M Section, 9/32 in W Top, 27.95 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053302073
-
Manufacturer Part Number7M710
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness7/32 in
-
MaterialHigh Modulus Polyurethane
-
Top Width9/32 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Minimum Pulley Diameter2.546 in
-
Section Size7M
-
Series8903
-
Number of Ribs1
-
Outside Length27.95 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Unique 60 deg angle polyurethane construction transmits greater loads at higher speeds in less space than conventional V-belts
-
Alternative Part Number89030710
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Polyflex® 7M710 Light Duty V-Belt, 7M Section, 9/32 in W Top, 27.95 in L Outside, 7/32 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission Hi-Power® II PowerBand® 5/B67 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 70 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Bell & Gossett 110135 Safety Relief Valve With 1 in NPT Tapping, 1 in Nominal, NPT End Style, 125 psig Pressure, Brass Body
Bell & Gossett diaphragm operated cast iron and diaphragm-assist operated bronze ASME Safety Relief Valves are designed to protect fired and unfired hot water pressure vessels against over-pressure conditions. These valves feature a unique failsafe disc with sufficient area to permit the valves to maintain their safety relief function in the event of a diaphragm rupture. These valves are designed, manufactured, tested and labeled in accordance with the requirements of Section IV of the ASME Boiler and Pressure Vessel code. They are offered in a wide range of capacities to permit a close match with the boiler output rating.
Kuriyama VFL200X300 VFL Water Discharge Hose, Hose End Style, 300 ft L, 65 psi Working, PVC, Import
Kuriyama VFL200X300 VFL Water Discharge Hose, Hose End Style, 300 ft L, 65 psi Working, PVC, Import
Coilhose® N34-50B Coiled Air Hose, 3/4 in Nominal, 3/4 in MPT Swivel End Style, 50 ft L, 120 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N34-50B Coiled Air Hose, 3/4 in Nominal, 3/4 in MPT Swivel End Style, 50 ft L, 120 psi at 70 deg F Working, Nylon, Domestic
Gates® Power Transmission Hi-Power® II B37 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 40 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
