Alemite® B1741-A Visi-Lube Automatic Lubricator, 1.22 oz, 1/8 in MNPT Shank Thread, -40 to 150 deg F Operating
Alemite® B1741-A Visi-Lube Automatic Lubricator, 1.22 oz, 1/8 in MNPT Shank Thread, -40 to 150 deg F Operating
-
BrandAlemite®
-
UPC098468108864
-
Manufacturer Part NumberB1741-A
-
CountryCanada
-
ColorBlack/Green/Orange
-
Container Size1.22 oz
-
Shank Thread Size1/8 in MNPT
-
Operating Temperature-40 to 150 deg F
- Clear plastic allows easy monitoring of grease level
- Refillable through standard hydraulic grease fitting
- Sturdy, 1 piece steel base and core
- Controls grease flow through spring pressure
- Safety vent prevents overflowing
- Extra heavy: 5.8 psi full - 3.6 psi empty, heavy: 4.6 psi full - 2.9 psi empty, Standard: 3.5 psi full - 2.2 psi empty
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100874138 |
| Applied Industrial Technologies | 100874138 |
-
UNSPSC27112914
-
Package Description1/PK
-
Catalog
Recently Viewed
Alemite® B1741-A Visi-Lube Automatic Lubricator, 1.22 oz, 1/8 in MNPT Shank Thread, -40 to 150 deg F Operating
Alemite® B1741-A Visi-Lube Automatic Lubricator, 1.22 oz, 1/8 in MNPT Shank Thread, -40 to 150 deg F Operating
CRC® 03055 Non-Flammable Oil Chain Lubricant, 16 oz Aerosol Can, Liquid Form, 0.874
Blend of synthetic lubricants and mineral oil to keep roller drive and conveyor chains lubricated. Penetrates, lubricates and protects moving parts by reducing friction and wear. NSF H1 rated for incidental food contact.
Bell & Gossett 110135 Safety Relief Valve With 1 in NPT Tapping, 1 in Nominal, NPT End Style, 125 psig Pressure, Brass Body
Bell & Gossett diaphragm operated cast iron and diaphragm-assist operated bronze ASME Safety Relief Valves are designed to protect fired and unfired hot water pressure vessels against over-pressure conditions. These valves feature a unique failsafe disc with sufficient area to permit the valves to maintain their safety relief function in the event of a diaphragm rupture. These valves are designed, manufactured, tested and labeled in accordance with the requirements of Section IV of the ASME Boiler and Pressure Vessel code. They are offered in a wide range of capacities to permit a close match with the boiler output rating.
Gates® Power Transmission Super HC® QD5/5V8.50 Heavy Duty Multiple Groove Sheave, 7/8 to 3-1/2 in QD® Bore, 8-1/2 in OD, 5 Grooves, 8.4 in Dia Pitch, 3-3/4 in W Face
Gates QD, or "Quick Disconnect", sheaves are designed for easy, convenient use with your Super HC™ and Super HC PowerBand® belts.
Sealmaster 2-1/4"-ID 4-BOLT TRB FLANGE UNITS SEA RFB-204-C
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options as illustrated on the pages to follow.
Crosby® 1032812 HG-228-1 X 12 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 12 in Take Up, 27.18 in L Close, Steel
Crosby® 1032812 HG-228 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 12 in Take Up, 27.18 in L Close, Steel
