B BLP MOBILE PAINTS
1-OZ BLACK PAINT COLORANT-BLPB >
Recently Viewed
1-OZ BLACK PAINT COLORANT-BLPB >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Weiler® 03200 TL-10 Wide Face Wheel Brush, 10 in Dia Brush, 2 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 2 in Arbor Hole
Weiler® 03200 TL-10 Wide Face Wheel Brush, 10 in Dia Brush, 2 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 2 in Arbor Hole
Milwaukee® Diamond Plus™ 49-56-5645 Diamond Grit Threaded Hole Saw, 2 in Dia, 1-1/2 in D Cutting
The MILWAUKEE® 2" Diamond Max™ Hole Saw delivers up to 20X longer life with unmatched cuts in porcelain. Diamond Max™ Hole Saws offer best-in-class performance with higher-grade diamonds and superior retention. Features Maximum wear resistance to tackle the most demanding tile and stone applications. The improved grip delivers easier starts into material for clean, fast cuts. Designed for more cutting with less clogging.
Weiler® 17616 Conflex Wheel Brush, 3 in Dia Brush, 1/2 in W Face, 0.0118 in Dia Crimped Filament/Wire
Weiler® 17616 Conflex Wheel Brush, 3 in Dia Brush, 1/2 in W Face, 0.0118 in Dia Crimped Filament/Wire
