MORSE C/Tool 1/8" 2-FLUTE CARBIDE BALL ENDMILLS MCT 58108
MORSE® 58108 5940 Ball Nose Center Cutting Regular Length Single End End Mill, 1/8 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
-
BrandMORSE®
-
UPC686125581084
-
Manufacturer Part Number58108
-
CountryUSA
-
FinishBright
-
MaterialSolid Micrograin Carbide
-
Flute TypeSpiral
-
TypeBall Nose Center Cutting Regular Length Single End
-
Helix Angle30 deg
-
Series5940
-
Cutter Diameter1/8 in
-
Shank Diameter1/8 in
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Shank TypePlain/Round
-
Length of Cut1/2 in
-
Overall Length1-1/2 in
- 2-flute end mills provide increased chip capacity for higher feed rates
- Recommended for easy-to-machine materials including low alloy steels, non-ferrous materials and cast iron
- Ball nose end mills are designed for milling die cavities, fillets, round bottom holes and radius bottom slots
- Center cutting end allows for plunge cutting like a drill into solid materia
-
UNSPSC23241614
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 58108 5940 Ball Nose Center Cutting Regular Length Single End End Mill, 1/8 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
BBI 451009 Partially Threaded Cap Screw, 1-1/8-7, 6-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451009 Partially Threaded Cap Screw, 1-1/8-7, 6-1/2 in L Under Head, 8 Grade, Alloy Steel, Plain
1-OZ BLACK PAINT COLORANT-BLPB >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Weiler® 03200 TL-10 Wide Face Wheel Brush, 10 in Dia Brush, 2 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 2 in Arbor Hole
Weiler® 03200 TL-10 Wide Face Wheel Brush, 10 in Dia Brush, 2 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 2 in Arbor Hole
