VESTIL 72" X 48" 8250-LB STEEL DOCKPLATES VES SEH-7248-SND
72" X 48" STEEL DOCKPLATES-VESSEH7248SND>
Recently Viewed
72" X 48" STEEL DOCKPLATES-VESSEH7248SND>
Dichtomatik N70331 O-Ring, 331 Dash Number, 2.225 in ID x 2.645 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ShearTapâ„¢ 34502 2090 Spiral Point Tap, Right Hand Cutting, 1-8 Thread, H4 Thread Limit, Plug Chamfer, 4 Flutes, Black Steam Oxide Over Nitride, HSS
Square Dâ„¢ D223NRB F3 Series Fusible General Duty Iceproof Rainproof Safety Switch, 240 V AC, 100 A, 15 hp, 3PST Contact, 2 Poles
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a fusible disconnect and has a rated current of 100A for 240VAC. This general duty switch has a 3 wire configuration with 2 poles and a factory installed neutral. The device accepts H, K or R fuse types. The enclosure is surface mounted and is a Type 3R with bolt on provisions. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
Square Dâ„¢ DU323RB F3 Series General Duty Non-Fusible Iceproof Rainproof Safety Switch, 240 V AC, 100 A, 30 hp, 3PST Contact, 3 Poles
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a non fusible disconnect and has a rated current of 100A for 240VAC. This general duty switch has a 3 wire configuration with 3 poles. The enclosure is surface mounted and is a Type 3R with bolt on provisions. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
1"-ID FL/OD INSERT BEARINGS-FAF1100KLL>
