Crosby® 1018570, G209-1 1/4, Anchor Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018570 Anchor Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018570
-
CountryUSA
-
Load Capacity12 ton
-
FinishHot Dipped Galvanized
-
SeriesG-209
-
Inner Length4.69 in
-
Inner Width3-1/4 in
-
Size1-1/4 in
-
Opening Size2.03 in
-
Body MaterialCarbon Steel
-
Overall Length8-1/4 in
-
Overall Width6-1/4 in
-
Eye Outer Size3 in
-
Pin Diameter1-3/8 in
-
Pin MaterialAlloy
-
Pin TypeScrew
- Working load limit and grade 6 permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 400 deg F
- 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
- The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- The tests are conducted by Crosby® and 3.1 test certified
- All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
- Look for the Red Pin® the mark of genuine Crosby® quality
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 29WP69 |
-
UNSPSC24101641
-
Standards/ApprovalsABS/DNV/Lloyds/CE Certified|ASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV Certification Notes 2.7-1|Federal Spec RR-C-271F|Type IVA|Grade A|Class 2
-
Catalog
Recently Viewed
Crosby® 1018570, G209-1 1/4, Anchor Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018570 Anchor Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized
HCI Preferred Supplier 20085N 90 deg Swivel Elbow, 1/2 x 3/8 in Nominal, Push-In x MIP End Style, Brass
HCI Preferred Supplier 20085N 90 deg Swivel Elbow, 1/2 x 3/8 in Nominal, Push-In x MIP End Style, Brass
Plumb® 11522 Ball Pein Hammer, 15 in OAL, 40 oz Forged Steel Head, Hickory Wood Handle
Plumb® 11522 Ball Pein Hammer, 15 in OAL, 40 oz Forged Steel Head, Hickory Wood Handle
1-TON 12'-LIFT CABLE PULLER
GENERAL® 21 Sheet Metal Gage, 0 to 36 AWG Measuring, 3-1/4 in Dia
GENERAL® 21 Sheet Metal Gage, 0 to 36 AWG Measuring, 3-1/4 in Dia
TB Wood's® L0901 Straight L-Jaw Coupling Hub, L090 Coupling, 1 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel
