Browning COUPLINGS--USE "IDC" L-090 X 100-K
TB Wood's® L0901 Straight L-Jaw Coupling Hub, L090 Coupling, 1 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel
-
BrandTB Wood's®
-
UPC698672118958
-
Manufacturer Part NumberL0901
-
CountryUSA
-
MaterialSintered Carbon Steel
-
Maximum Speed9000 rpm
-
Screw Size1/4-20 UNC-2B x 3/8 in L
-
Coupling SizeL090
-
Hub Diameter2.11 mm
-
Hub Length2.13 in
-
Keyway Size1/4 x 1/8 in
-
Length Through Bore0.81 in
-
Bore Diameter1 in
-
UNSPSC31163000
-
Standards/ApprovalsPROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
TB Wood's® L0901 Straight L-Jaw Coupling Hub, L090 Coupling, 1 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel
Leviton® line of extra heavy duty industrial grade locking receptacles are designed and manufactured to withstand the harsh conditions typically associated with industrial environments. Available in a wide variety of configurations, including isolated ground, tamper resistant, hospital grade and more, these industrial grade devices are the electrical contractor's choice for use in factories, schools, hospitals and commercial office buildings.
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
Click Torque Wrench, 1/4 in Drive, 20 to 200 in-lb, 1 lb Graduation, 10-1/2 in OAL
ELASTOMERIC TENSIONERS-LOVSE18 >
Proto® JH7-250FRB SAE Electronic Torque Wrench, 1/2 in Drive, 25 to 250 ft-lb, Fixed/Ratcheting Head, 0.01 ft-lb/0.1 in-lb Graduation, 27-3/4 in OAL, ASME B107.28
Proto® JH7-250FRB SAE Electronic Torque Wrench, 1/2 in Drive, 25 to 250 ft-lb, Fixed/Ratcheting Head, 0.01 ft-lb/0.1 in-lb Graduation, 27-3/4 in OAL, ASME B107.28
