WERNER® D6210-1 D6200-1 Type IA Duty Single Section Straight Ladder, 8 ft H x 19 in W, 300 lb Load, 10 ft Top Step, Fiberglass
The D6210-1 ladders are one section straight ladders made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 300 lb making them durable and long lasting. The TRACTION-TRED® D-rungs are slip resistant, and the durable rail shields and shoe brackets help to protect the rails from damage. The dual action feet pivot for use on hard or penetrable surfaces.
-
BrandWERNER®
-
UPC051751032208
-
Manufacturer Part NumberD6210-1
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Top Step Height10 ft
-
Top to Bottom Rung9 ft
-
TypeType IA Duty Single Section
-
Rung Diameter1-1/2 in
-
Rung Spacing12 in
-
Rung TypeD-Rung
-
Rung Width1-5/8 in
-
SeriesD6200-1
-
Number of Rungs10
-
Overall Height8 ft
-
Overall Width19 in
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-5/8 in slip resistant TRACTION-TRED® D-rungs
- Pre-pierced holes for easy field installation of accessories
- Combination rail shield bracket and shoe with SHU-LOK® and slip resistant pad
- Molded rung braces on bottom step for increased durability
- Mar resistant molded end caps
- 1 section
- 13 ft H reach
- 10 ft L open extended
- 10 ft L closed
- 3-5/16 in rails
- 1-3/16 in flange
- 16 in W fly
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
WERNER® D6210-1 D6200-1 Type IA Duty Single Section Straight Ladder, 8 ft H x 19 in W, 300 lb Load, 10 ft Top Step, Fiberglass
The D6210-1 ladders are one section straight ladders made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 300 lb making them durable and long lasting. The TRACTION-TRED® D-rungs are slip resistant, and the durable rail shields and shoe brackets help to protect the rails from damage. The dual action feet pivot for use on hard or penetrable surfaces.
Starrett® 387-18 Beveled Straight Edge, Imperial Measuring System, Graduations 32nds of an Inch, Steel, Regular Steel
The Starrett 387 Series Steel Straight Edge with Bevel and Graduated End is precision ground and nicely finished to rigid Starrett standards. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Its thickness and design permits it to retain its shape and accuracy, but still be portable and easy to handle. 18" (450mm).
ISOSTATIC™ Oilube® 402109 Round Bore Flange Bearing, 1 in Dia Bore, 1-1/4 in OD, 1-1/2 in W, 1-5/8 in Dia Flange
ISOSTATIC™ Oilube® 402109 Round Bore Flange Bearing, 1 in Dia Bore, 1-1/4 in OD, 1-1/2 in W, 1-5/8 in Dia Flange
Dichtomatik N70152 O-Ring, 152 Dash Number, 3.237 in ID x 3.443 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
IDEAL® 774045 Full-Size Rocker Switch, 20 A at 125 V AC, 15 A at 227 V AC, 2 A at 110 to 250 V AC, SPST Contact, 1 Poles
IDEAL® 774045 Full-Size Rocker Switch, 20 A at 125 VAC, 15 A at 227 VAC, 2 A at 110 to 250 VAC, SPST Contact, 1 Poles
MORSE® 43120 1887 Ball Nose Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-3/8 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 43120 1887 Ball Nose Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-3/8 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
